Sony CMT HPZ7 Betriebsanleitung - Seite 19

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony CMT HPZ7 herunter. Sony CMT HPZ7 40 Seiten. Micro hi-fi component system
Auch für Sony CMT HPZ7: Betriebsanleitung (40 seiten), Betriebsanleitung (40 seiten)

Sony CMT HPZ7 Betriebsanleitung
To change
the
AM tuning
interval
(except
for
European
model)
The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change tile
AM tuning interval, tune in any AM station first.
then turn oflthe
system. While holding Di>Dt>0.
press I/(!) on the unit. When you change the
interval, all the AM preset stations are erased.
To reset the interval, repeat the same procedure.
Note
You cannot change the AM tuning interval in Po_er
Saving Mode (page 26).
Tips
• The preset stations are retained for about baH a day
even if you disconnect the power cord or if a power
l,ulure occurs.
• To improve broadcast reception, a_liust the supplied
antennas, or connect a commercially available
external antenna.
To
improve
tuner
reception
When tuner reception
is poor. set CD player
power off by CD power manage function.
CD power is factory set to on.
Use buttons
oll the unit for the operalion.
1
Press FUNCTION repeatedly to switch the
function to CD.
2 Press I/@ to turn off the system.
3 After "STANDBY" stops flashing, press I/_
while holding l
"CD POWER" and "OFF" appear.
To set
CD power
on
Repeat the procedure
above and "CD POWER"
and "ON" appear.
Notes
• When "CD POWER" and "OFF are selected, disc
access time is increased.
• You cannot change the sclting in Power Saving
Mode (page 26).
You can lislen to a radio slalion either by
selecting a presel station, or by manually luning
in lhe slalion.
Listening
to a preset
station
-- Preset Tuning
Preset radio stations in the Iuner's memory first
(see "Presetting
radio stations"
on page 18).
1
Press TUNER BAND (or FUNCTION
repeatedly) to switch the function
to
TUNER.
2
3
4
Press TUNER BAND repeatedly to
select "FM" or "AM".
Press TUNING MODE repeatedly until
"PRESET"
appears in the display.
Press + or-
(or TUNE + or-
on the unit)
repeatedly
to select the desired
preset
station.
continued
19G8