Front Panel
Front Panel
The ports, LEDs, and Reset button are located on the front panel of the switch, as well as the following
components:
Cisco Business 350 Series Model
Note
Models may differ within the CBS 350 series and this is just a representation of a model within the series.
• There are 2 device types with different console interface:
• USB Port—The USB port connects the switch to a USB device so that you can save and restore the
• RJ-45 Ethernet Ports—The RJ-45 Ethernet ports connect network devices, such as computers, printers,
• SFP+ Port (if present)—The small form-factor pluggable plus (SFP+) are connection points for modules
• Small form-factor pluggable (SFP) ports are connection points for modules, so the switch can link to
• Some SFP interfaces are shared with one other RJ-45 and SFP+ port, called a combo port. When the SFP
Get To Know Your Switch
10
1. Console port with RJ-45 and mini-USB connector if both are connected the Mini USB has precedence
over the RJ-45
2. RJ-45 connector only type of console.
The console interface connects a serial cable to a computer serial port so that it can be configured using
a terminal emulation program or mini USB cable (depending on connector).
configuration files, firmware images, and SYSLOG files through the connected USB device. The USB
port supports the FAT32 file system.
and access points, to the switch.
so that the switch can link to other switches. These ports are also commonly referred to as mini 10GigaBit
Interface Converter ports. The term SFP+ is used in this guide.
• The SFP+ ports (if present) are compatible with the following Cisco SFP 1G optical modules
MGBSX1, MGBLX1, MGBLH1, MGBT1, as well as other brands.
• The SFP+ ports are compatible with the following Cisco SFP 1G optical modules MGBSX1,
MGBLX1, MGBLH1, MGBT1, as well as other brands.
• The Cisco SFP+ Copper Cable modules that are supported in the Cisco switches are:
SFP-H10GB-CU1M, SFP-H10GB-CU3M, and SFP-H10GB-CU5M.
• The LEDs of the corresponding RJ-45 port flash green to respond to the SFP interface traffic.
other switches.
is active, the adjacent RJ-45 port is disabled.
Get To Know Your Switch
Seite drucken