Sony CMT-HX50BTR Betriebsanleitung - Seite 34
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony CMT-HX50BTR herunter. Sony CMT-HX50BTR 44 Seiten. Micro hi fi component system

USB device
You cannot start recording to an USB
device.
The following problems may have
occurred.
The USB device is full.
The number of files and folders on
the USB device has reached the
upper limit.
The USB device is write-protected.
Recording is stopped before it is
finished.
You are using an unsupported USB
device. See "USB devices" (page 43) for
the supported device types.
The USB device is not formatted
correctly. Refer to the USB device
operation manual for how to format.
Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again after removing
it from the system. Then perform
recording again.
If the recording and erase operations
are repeated multiple times, the file
structure within the USB device
becomes fragmented. Refer to the USB
device operation manual for how to
deal with this problem. If the problem
persists, contact your nearest Sony
dealer.
Recording to an USB device results in
an error.
You are using an unsupported USB
device. See "USB devices" (page 43) for
the supported device types.
Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again after removing
it from the system. Then perform
recording again.
GB
The USB device was disconnected
or the power was turned off during
recording. Delete the partially-
recorded file, and record again. If this
does not fix the problem, the USB
device may be broken. Refer to the
USB device operation manual for
how to deal with this problem. If the
problem persists, contact your nearest
Sony dealer.
Files or folders on the USB device
cannot be erased.
Check if the USB device is write-
protected.
The USB device was disconnected
or the power was turned off during
the erase operation. Delete the
partially-erased file. If this does not
fix the problem, the USB device may
be broken. Refer to the USB device
operation manual for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See "USB devices" (page 43) for
the supported device types.
The USB device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
Recording stops before it is finished.