Argo Genius Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Fan Argo Genius herunter. Argo Genius 9 Seiten. Smart fan

Place the unit on a flat and stable surface and connect the power cord to a suitable power outlet (230 V~): the appliance
can be switch on using the ON/OFF switch.
This product can be used as a fan – in 4 modes (Normal, Natural, Sleep and ECO-Normal) and with 3 fan speed
options (medium-low, high and low).
The buttons are all touch controls, so the functions can be activated by touching the corresponding buttons on the control
panel.
When the appliance is switched on, all the LED lights turn on for 2 seconds and emit a double beep to signal that the unit
is functioning correctly. All the LED lights then turn off and the unit enters the stand-by mode.
In stand-by mode only the ON/OFF button works, so pressing it allows for starting the unit. The unit is initially set to low
speed in NORMAL mode without the timer nor the rotation function, as evidenced by the lit LEDs.
Memory function
All the operating modes, with the exception of the Timing and Sleeping modes, will be memorised; the fan will operate
with the same functions when switched on the next time.
Energy saving function
The LED indicators will automatically lower their original brightness by 30% if no operations occur on the control panel
after 1 minute. Pressing any button again restores the original brightness.
1. ON/OFF
ON/OFF BUTTON
Press the ON/OFF button to switch the appliance on. When the appliance is switched on it enters the stand-by mode and
all the LED lights turn on for 2 seconds.
MODE BUTTON
The fan is initially set to Normal mode; press the MODE button to select other operating modes: 'Normal' –
'Natural' – 'Sleeping' – 'ECO-Normal'. Depending on the selected mode, the corresponding LED indicator will
light up; the LED indicator does not light up in Normal mode, but does so in the other corresponding modes.
Press the MODE button to select the fan speed:
-
Normal mode: the unit operates with three constant ventilation speeds: high, medium and low.
-
Natural mode: the unit operates by alternating the three ventilation speeds according to the following schemes in
relation to the set ventilation speed.
V 12/16
DISPLAY AND CONTROL PANEL
2. MODE
3. TIMER
4. SPEED
5. HORIZONTAL
SWIVELLING/
PRESENCE
SENSOR
6. VERTICAL
SWIVELLING
15