Sony LBT-XB44KS Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony LBT-XB44KS herunter. Sony LBT-XB44KS 44 Seiten.
Seite drucken
1
Connect the speakers.
1 Connect the speaker cords to
SPEAKER jacks of the same color.
Keep the speaker cords away from the
antennas to prevent noise.
Red (')
Black (')
2 Insert only the stripped portion of the
cord. Inserting the vinyl portion will
interfere with the speaker connection
and no sound will come from the
speaker.
2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
Extend the FM wire
antenna horizontally.
AM loop antenna
3
Set VOLTAGE SELECTOR to the
position of your local power line
voltage.
VOLTAGE SELECTOR
110-120V
R
L
220-240V
4
Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the plug on this unit does not fit your
wall outlet, detach the supplied adapter
from the plug.
5
Deactivate the demonstration mode
by pressing DISPLAY/DEMO while
the system is off.
Inserting two size AA (R6)
batteries into the remote
Tips
• With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
• When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY/DEMO while the system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Hold down PLAY MODE and press 1/u to
turn off the system.
5