Argo LME 230 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Laminiergerät Argo LME 230 herunter. Argo LME 230 8 Seiten.

LAMINATING MACHINE

1. Entry slot

2. Power Light

3. Ready Light

4. Heating Vent

5. Exit slot

6. Power Button

OPERATING INSTRUCTIONS

Before laminating it is advisable to carry out a test lamination to familiarise yourself and

to make sure that your machine is working correctly.

1. Remove all packaging and plug the machine into an appropriate socket.

2. Choose the correct pouch thikness. turn on the maschine (Power button position "i")

3. the machine will reach the correct temperature in approx 3mins., wait for 5-10 min to

get the best results.

4. When the ready light (3) is on, insert the laminating pouch squarely and centrally (with

the sealed side first) into the front of the laminator (1).leave minimum margin of 3mm

around the edge.(You do not need to use a pouch carrier).

5. the pouch will automatically pass through the machine. Remove pouch only when

lamination is complete (pouch completely out 6).

6. turn off ( power button position "0")and unplug the maschine when not use

MACHINE MAINTENANCE

For machine health we recommend that a page of blotting or similar paper is passed on

its own through the machine on a regular basis. this will help to remove excess adhesive

that may have leaked from the lamination pouches. this is best done when the machine

is hot.

Lamination machines are ideal for preserving, protecting and enhancing Pictures, Dra-

wings, Certificates, Photos, Notices, magazine Recipes and many other similar items.

When laminating, we recommend that you leave minimum margin of 3mm / ⅛ inch aro-

Nasza oferta w internecie: www.argo.pl