Sony MAP-S1 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Stereo System Sony MAP-S1 herunter. Sony MAP-S1 2 Seiten. Multi audio player system

Seite drucken
iPhone
Connecting to a Wireless Network by SongPal
1
2
Confirm that your iPhone is connected to the
Install SongPal on your iPhone, then launch
wireless network.
the app.
Search for "SongPal" at the
App Store.
After SongPal is launched, follow the app's
instructions.
5
Start SongPal on your iPhone.
ÔTap [SONY:MAP-
When the following screen
appears, tap [OK].
S1(Bluetooth)].
Pairing is completed in
about one minute.
Making a Wireless Connection with the WPS button on your Wireless LAN Router
1
2
Check that the network (LAN) cable (not
Set the unit to WPS mode by performing the
supplied) is disconnected from the unit, then
following procedures.
turn on the unit.
Standby indicator
MENU
/
ENTER
The standby indicator lights up in yellow green and
starts flashing in the display window after about
two minutes.
The Wi-Fi connection can also be made using a PC, or the network can be wired. For details, refer to the Operating Instructions.
3
Set the unit in pairing mode.
Use the remote to set the unit in pairing mode. The
status of the unit is shown in the display window.
FUNCTION
MENU
/
ENTER
Tap [Allow]. The connection
is established in about two
minutes. When the
connection is completed, the
lights up in the display
window.
Press / of the unit to turn
it off, and then restart it.
The design of the app may change without notice.
3
Press and hold the WPS button* for more
than 3 seconds.
ÔPress MENU on the remote.
If MENU is pressed twice, the
operation is canceled.
ÔPress / on the remote to select
"Network Menu," then press
ENTER on the remote.
ÔPress / on the remote to select
"WPS," then press ENTER on the
remote.
"Connect" flashes after "WPS" flashes for several
tens of seconds in the display window, after which
ÔWhen "Ok" appears on the
will light once connection is completed.
display window, press ENTER on
* For details, refer to the operating instructions of the
the remote.
wireless LAN router.
"WPS" flashes in the display window.
ÔPress FUNCTION on the remote to select
"BLUETOOTH."
Display window
ÔPress MENU on the remote.
If MENU is pressed twice, the operation is
BLUETOOTH
canceled.
Bluetooth Menu
ÔPress / on the remote to select "Bluetooth
Menu," then press ENTER on the remote.
Pairing
ÔPress / on the remote to select "Pairing," then
press ENTER on the remote.
ÔPress / on the remote to select "Ok," then
press ENTER on the remote.
Ô
When "Pairing" starts flashing in the display
window, the unit enters pairing mode.
6
Play the music.
ÔClose SongPal on your
iPhone, and then swipe
up from the bottom of
the screen to display the
Control Center.
About "SongPal"
Sound settings
You can easily customize your sound.
Music service
You can enjoy various music services.
Controlling devices on your home
network
You can play music stored in your PC or DLNA server
over your network.
Operations for a CD inserted in the unit,
or a device connected via USB
You can play a CD that is inserted in the unit, or
music in a device connected to the USB connector.
What you can control with "SongPal" varies
depending on the connected device.
The specification and design of the app may
change without notice.
4
Make a BLUETOOTH connection from your
iPhone.
ÔTap [Settings] 
ÔTurn on BLUETOOTH.
[Bluetooth].
ÔTap
[AirPlay], select
[SONY:MAP-S1], then start
playback.
"AirPlay" appears on the display
window during music play.
Device Select
Home screen
Select a "SongPal" compatible device.
Displays the functions of the selected
device, music services, and apps installed on
your smartphone/iPhone.
Settings of the connected device
Mini player
Various sound/network settings are
Controller for the selected function.
displayed. This menu can be displayed from
any screen by flicking right.