Sony MDR-HW300K Betriebsanleitung

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MDR-HW300K herunter. Sony MDR-HW300K 2 Seiten. Wireless stereo headphone system

Seite drucken

Wireless Stereo

Headphone System

Operating Instructions

MDR-HW300K

English

Wireless Stereo Headphone System

The recycling of materials will help to conserve natural

WARNING

resources. For more detailed information about recycling

of this product, please contact your local Civic Office, your

To reduce the risk of fire or electric shock, do not

household waste disposal service or the shop where you

expose this apparatus to rain or moisture.

purchased the product.

To reduce the risk of fire or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects filled with liquids, such as vases, on the apparatus.

Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

packaging indicates that the battery provided with this

To avoid electrical shock, do not open the cabinet. Refer

product shall not be treated as household waste.

servicing to qualified personnel only.

On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

Do not install the appliance in a confined space, such as a

symbols for mercury (Hg) or lead (Pb) are added if the

bookcase or built-in cabinet.

battery contains more than 0.0005% mercury or 0.004%

As the main plug of AC power adaptor is used to

lead.

disconnect the AC power adaptor from the mains, connect

By ensuring these batteries are disposed of correctly, you

it to an easily accessible AC outlet. Should you notice an

will help prevent potentially negative consequences for

abnormality in it, disconnect it from the AC outlet

the environment and human health which could

immediately.

otherwise be caused by inappropriate waste handling of

the battery. The recycling of the materials will help to

The unit is not disconnected from the mains as long as it

conserve natural resources.

is connected to the AC outlet, even if the unit itself has

been turned off.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

Excessive sound pressure from earphones and

incorporated battery, this battery should be replaced by

headphones can cause hearing loss.

qualified service staff only.

To ensure that the battery will be treated properly, hand

The nameplate is located on the bottom of the transmitter.

over the product at end-of-life to the applicable collection

point for the recycling of electrical and electronic

equipment.

For all other batteries, please view the section on how to

Hereby, Sony Corp., declares that this equipment is in

remove the battery from the product safely. Hand the

compliance with the essential requirements and other

battery over to the applicable collection point for the

relevant provisions of Directive 1999/5/EC.

recycling of waste batteries.

For details, please access the following URL :

http://www.compliance.sony.de/

For more detailed information about recycling of this

product or battery, please contact your local Civic Office,

The validity of the CE marking is restricted to only those

your household waste disposal service or the shop where

countries where it is legally enforced, mainly in the

you purchased the product.

countries EEA (European Economic Area).

Notice for customers: the following information is only

Disposal of Old Electrical & Electronic

applicable to equipment sold in countries applying EU

Equipment (Applicable in the European

directives

Union and other European countries with

This product has been manufactured by or on behalf of

separate collection systems)

Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075

Japan. Inquiries related to product compliance based on

This symbol on the product or on its

European Union legislation shall be addressed to the

packaging indicates that this product shall

authorized representative, Sony Deutschland GmbH,

not be treated as household waste. Instead it shall be

Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any

handed over to the applicable collection point for the

service or guarantee matters, please refer to the

recycling of electrical and electronic equipment. By

addresses provided in the separate service or guarantee

ensuring this product is disposed of correctly, you will help

documents.

prevent potential negative consequences for the

environment and human health, which could otherwise be

caused by inappropriate waste handling of this product.

Checking the included

4-478-288-11(1)

items

Transmitter TMR-HW300 (1)

Headphones MDR-HW300 (1)

AC adaptor (1)

Micro-USB cable (approx. 50 cm) (1)

Connecting cable (approx. 1.5 m) (1)

Features

Thank you for purchasing the Sony MDR-HW300K Wireless

Stereo Headphone System. Before operating the unit,

please read this manual thoroughly and retain it for future

reference.

Some features are:

ˋ High quality sound with uncompressed digital

wireless transmission

2.4 GHz digital wireless transmission prevents

interference of obstacles. High quality sound with

uncompressed digital wireless transmission.

ˋ Powerful and expressive sound

Powerful and expressive sound with 40 mm

neodymium driver unit.

ˋ Comfortable fit even for a long period of time

Comfortable fit for long period of time with soft

earpads and head cushion.

ˋ Real-time automatic channel selection prevents

sound break up

Real-time automatic channel selection on headphone

system for best reception of signal. This system can

switch to a free channel automatically without any

sound interruption before the signal is blocked.

ˋ Volume control function on headphones

ˋ Easy charging with USB port

Disposal of waste batteries (applicable

3 hours to fully charge the battery, and approx. 10 hours

in the European Union and other

playback time. Can be used while charging the

European countries with separate

headphones.

collection systems)

ˋ Wired design option

Also works wired design headphones with supplied

This symbol on the battery or on the

connecting cable. You can enjoy content on a

smartphone, PC and tablet with this wired option.

ˋ Swivel design for easy storage

How to use

Charge the headphones.

(Red)

Complete when indicator

turns off.

Connect the A/V component, following hookup  or  below.

 Using the headphone jack of the A/V component

 Using the audio out (L/R) jacks of the A/V component

Use a plug adaptor (not supplied) between the transmitter and the A/V component.

Plug adaptor (Stereo mini jack ×1

 Pin plug ×2, not supplied)

Wear the headphones.

Before listening

Be sure to lower the volume of the headphones after the / (On/Standby)

indicator lights up, to reduce the risk of hearing damage.

Tactile dot

Hold down until

indicator lights up.

Adjust the volume.

The headphones will beep when the volume reaches

maximum or minimum.

Tactile dot

Using the unit by connecting the supplied cable

You can use the unit as ordinary wired headphones by connecting the supplied connecting cable. You can also

charge the headphones during wired use. Be sure to use the supplied connecting cable.

To reduce the risk of hearing damage, lower the volume of the A/V component before connection.

Supplied connecting cable

Connect the AC adaptor.

(Off)

TV, Digital music player, etc.

Headphone jack

(Stereo mini jack)

Stereo system, Blu-ray Disc player, DVD player, TV*, etc.

* In case of no headphone jack.

Audio out

(L/R) jacks

L (white)

R (red)

If the sound is distorted by connecting the transmitter to the A/V component's

audio out (L/R) jacks, reconnect the transmitter to the headphone jack.

Start playback of the A/V component.

After use

If no signal or low signal is input for

about 10 minutes

Stop playback of the A/V

component.

If the transmitter detects no signal, the POWER indicator of the

transmitter blinks for about 10 minutes, then the transmitter stops

Hold down the / (On/Standby)

the RF signal transmission automatically*. The transmitter restarts

button of the headphones until the

after receiving an audio signal again.

/ indicator turns off.

The transmitter may also stop if the volume of the connected A/V

Tip

component is too low. In this case, raise the volume of the

connected A/V component within the range where the sound is

The headphones will turn off

not distorted, then lower the volume of the headphones.

automatically if RF signal transmission

from the transmitter stops for about 5

* If signal noise is output from the connected A/V component, the

minutes.

transmitter may not turn off, even when no audio signal is input.

Storing the headphones

Check right and left of the headphones before swiveling to store.

To AC

outlet