Sony MEX-N4100BT Betriebsanleitung - Seite 31
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MEX-N4100BT herunter. Sony MEX-N4100BT 38 Seiten. Bluetooth audio system
Seite drucken
F:\0918\4548379111\4548379111MEXN5100BTUC\01GB-MEXN5100BTUC\040CD.fm
010COV.book Page 31 Thursday, September 18, 2014 10:49 AM
Connection/Installation
Cautions
Run all ground (earth) leads to a common
ground (earth) point.
Do not get the leads trapped under a screw, or
caught in moving parts (e.g., seat railing).
Before making connections, turn the car ignition
off to avoid short circuits.
Connect the yellow and red power supply leads
only after all other leads have been connected.
Be sure to insulate any loose unconnected leads
with electrical tape for safety.
Precautions
Choose the installation location carefully so that
the unit will not interfere with normal driving
operations.
Avoid installing the unit in areas subject to dust,
dirt, excessive vibration, or high temperature,
such as in direct sunlight or near heater ducts.
Use only the supplied mounting hardware for a
safe and secure installation.
Note on the power supply lead (yellow)
When connecting this unit in combination with other
stereo components, the amperage rating of the car
circuit to which the unit is connected must be higher
than the sum of each component's fuse amperage
rating.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Parts List for Installation
For MEX-N5100BT
This parts list does not include all the package
contents.
The bracket and the protection collar are
attached to the unit before shipping. Before
mounting the unit, use the release keys to
remove the bracket from the unit. For details,
see "Removing the protection collar and the
bracket" (page 35).
Keep the release keys for future use as they are
also necessary if you remove the unit from your
car.
MEX-N5100BT/MEX-N4100BT
masterpage: Right
× 2
5 × max. 8 mm
(
7
/
× max.
5
/
in)
32
16
× 4
31
GB
4-548-379-11(1)