Sony MHC-ESX9 Betriebsanleitung - Seite 15

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-ESX9 herunter. Sony MHC-ESX9 28 Seiten. Home audio system

Seite drucken

1. Playing a Usb Device

Tuner

Listening to the radio

Press TUNER/BAND repeatedly

to select FM or AM band.

For automatic scanning:

Press TUNING MODE repeatedly

until "AUTO" lights up in the display

panel. Then, press +/–.

Scanning stops automatically when a

station is tuned in, and then "TUNED"

and "ST" (for FM stereo programs

only) light up in the display panel.

If "TUNED" does not light up and

scanning does not stop, press x to stop

scanning. Then, perform manual

tuning (below).

For manual tuning:

Press TUNING MODE repeatedly

until "AUTO" and "PRESET"

disappear from the display panel.

Then, press +/– repeatedly to tune to

the station you want.

Note

When you tune to an FM station that

provides RDS services, information such as

the service name or station name is provided

by broadcast. You can check the RDS

information by pressing DISPLAY

repeatedly.

Tip

To reduce static noise on a weak FM stereo

station, press FM MODE repeatedly until

"MONO" lights up in the display panel.

To change the AM tuning interval

The default setting for AM tuning interval

is 9 kHz (or 10 kHz for some areas). You

cannot change the AM tuning interval in

Power Saving Mode.

Use the buttons on the unit to perform this

operation.

Press FUNCTION repeatedly to

select AM band.

Press "/1 to turn off the system.

Press TUNING +, then press

FUNCTION.

"9K STEP" or "10K STEP" appears in

the display panel.

When you change the interval, all the

AM preset stations are erased.

Presetting radio stations

You can store up to 20 FM and 10 AM

stations as your favorite stations.

Tune to the station you want.

Press TUNER MEMORY.

Press +/– repeatedly to select

the preset number you want,

then press ENTER.

"COMPLETE" appears in the display

panel. The station is stored.

To tune to a preset station

Press TUNING MODE repeatedly until

"PRESET" lights up in the display panel.

Then, press +/– repeatedly to select the

preset number you want.

Preset number