Sony MHC-EX5 Betriebsanleitung - Seite 27

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-EX5 herunter. Sony MHC-EX5 29 Seiten.

Seite drucken

integrated stereo amplifier

(TA-EX5)

40 W + 40 W (6 ohms,

at 1 kHz, DIN)

Continuous RMS power output

50 W + 50 W (6 ohms,

at 1 kHz, 5% THD)

Music power output

100 W + 100 W (6 ohms

at 1 kHz, 10% THD)

Inputs

CD (phono jacks):

TUNER (phono jacks):

AUX/ VIDEO (phono jacks):

TAPE! (phono jacks):

TAPE2 (phono jacks):

sensitivity 250 mV,

impedance 47 kilohms

Outputs

MD/DAT (phono jacks):

voltage 250 mV

impedance 1 kilohm

HEADPHONES (stereo phono jack):

accepts headphones of 8 ohms

or more

TAPE1 (phono jacks):

TAPE2 (phono jacks):

voltage 250 mV

impedance 1 kilohm

Dimensions

Approx. 280 x 125 x 315 mm (w/h/d)

(111/8x5 x 121/2 inches)

Mass

Approx. 5.5 kg

(12 Ib 3 oz)

Speaker (SS-EX50)

System

3-way bass reflex

Speaker units

Woofer:

16 cm dia., cone type

Tweeter:

5 am dia., cone type

Super-Tweeter:

2 cm dia., dome type

Rated impedance

6 ohms

Dimensions

Approx. 225 x 410 x 285 mm (w/h/d)

(87/8x 16 1/4x 11 1/4 inches)

Mass

Approx. 5.3 kg

(11 Ib 11 02)

Supplied accessories

AM loop aerial (1)

Remote RM-S75 (1)

Sony SUM-3 (NS) batteries (2)

FM lead aerial (1)

Flat cord (1)

Audio cords (4)

(50cm, for connecting components)

Speaker cords (2)

General

Power requirements

220-230 V AC,

50/60 Hz

Power consumption

110 W (system)

Glossary

In this section, you can get brief

information about the following:

*RDS Receiving

*Recording Functions

It will help you understand your stereo

system thoroughly.

RDS Receiving

Radio Data System (RDS)

With the RDS broadcasting service, you can

get additional information with regular

radio programming. For example, you can

have the tuner automatically switch to a

programme type of your choice when one

starts in your broadcast area. This service is

called 'Enhanced Other Networks (EON)".

See the list below for the different types of

RDS services now available. (The letters in

parentheses show the RDS code names for

the service.)

RDS works only on the FM band".

Note

RDS may not operate correctly if the tuned

station is not transmitting properly or if

broadcast is weak.

Notall FM stations provide RDS service,

nor do all RDS stations provide the same

services. If in doubt, check with your

local radio stations for details on RDS

services in your area.

Program Service Name (PS)

You can locate a station by its commonly

known name.

You do not have to know its assigned

frequency because this service identifies

each station by its name (for example, WOR

instead of 103.8 MHz).

Traffic-Announcement Identification

(TA)

You can quickly tune in the station

currently broadcasting the traffic report.

You can use the tuner to automatically

search for stations currently broadcasting

traffic information.

This service indicates that a traffic

announcement is being broadcast in your

area, even if the station you are listening to

is not broadcasting the traffic programme.

Traffic-Program identification (TP)

You can use the tuner to automatically

search for stations broadcasting traffic

programmes.

The tuner identifies programmes carrying

traffic announcements.

You can find out the latest traffic conditions

in your area before leaving home.

The Recording Functions

About Dolby NR*

When you listen to soft music, you can

reduce the high-frequency tape hiss noise

by using Dolby noise reduction system B or

Type C has greater noise reduction

capability.

However, record your tapes in Dolby B if

you intend to play back your tapes ona

unit equipped with only type B (e.g.,a

headphone stereo).

Dolby noise reduction manufactured

under license from Dolby Laboratories

Licensing Corporation.

"DOLBY" and the double-D symbol 00

are trademarks of Dolby Laboratories

Licensing Corporation.

About Fade Synchro

This feature slowly fades out a recording so

that a track is not abruptly cut off at the end

of the tape.

If the tape reaches the end of its front side

while recording the middle of a track, the

unit re-records it automatically after

rewinding the tape to the beginning of the

track. This time, the track is recorded with a

fadeout at the end of the tape.

(Recording ends at this point if it is a single-

sided recording.)

Recording in the original track order of

the CD

Front side

Reverse side

The track at the

end of the reverse

side is also faded

out if it does not fit

the end of the

in the tape length.

front side.

When the total length of the track to be

recorded is shorter than the length of one

side of the tape by programming the track

order, the unit automatically operates as

follows:

Recording starts

from the track that

was faded out at

When the CD player is paused, the deck

continues recording silence until it

reaches the end of the front side; then it

reverses the tape and starts recording.

Front side

7 |

acs

| a

Reverse side

Once all of the selected tracks have

been recorded, the deck records about

four seconds of silence and then stops.

continue to next page >

For Your Information