Sony MHC-GN660 Betriebsanleitung - Seite 29

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-GN660 herunter. Sony MHC-GN660 48 Seiten. Sony mhc-gn660 stereo system: user guide
Auch für Sony MHC-GN660: Betriebsanleitung (48 seiten)

Seite drucken
Sony MHC-GN660 Betriebsanleitung
o
O
Press
DIRECTION
repeatedly
on the
system
to select
".-_---" to record
on one
side or "c_-Y'
to record
on both sides.
If you select
"_--",
press
_
repeatedly
until
"1_" lights
up in the display
to select
front
side
as recording
side.
Press
repeatedly
until
"'ql" lights
up in the display
to select
reverse
side as recording
side.
Press m.
9
Press
I/(_) to turn
off the system.
Other
operations
To
Do this
Check the setting
1 Press CLOCK/TIMER
SELECT.
2 Press _+
or
repeatedly
to select "RE("
SELECT?"
then press
ENTER
Change
the setting
Strut from step 1
Cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press I_P,I+ or
repeatedly
to select "TIMER
OFF'?", then press ENTER.
Notes
• You cannot select the Play Timm
and Timm
Recording
at the same time.
• If you use the Timer Recording
and the Sleep Timer
at the same time, the Sleep Timer has priority.
• The Timer Recording
will not be activated
if the
system is on.
• The volume is reduced
to minimmn
dming Tima
Recording.
• Do not operate
the system
flora the time the system
lm-ns on until the recording
starts (about 15 seconds
before
the preset time)
Tips
• The system
turns on 15 seconds betble
the preset
time
• When the Timer
Recording
is activated,
"REC"
lights up in the display
-- Power Saving Mode
The demonstration
display and the clock display
can be turned off to minimize
the amount of
power consumed
during standby mode (Power
Saving Mode).
Press DISPLAY repeatedly
while the
system is turned off until the
demonstration
display and the clock
display disappears in the display.
To cancel
Power
Saving
Mode
Press DISPLAY
repeatedly
while the system is
turned oft'. Each time you press the button, the
display changes cyclically
as follows:
Demonstration
1)---+ C!ock 2_---+ No display
(Power Saving Mode)
1) The display changes and tile indicators flashes even
when the system is tinned off
2) .__.__,,appears in the display if you have not set the
clock
Note
You caimot do the following
operations
during
Powa
Saving Mode:
Setting the clock (page 11)
Changing
the AM tuning inte_a,al (page 17)
Tmning
on the system by p_essing the fimction
buttons
(CD, TAPE A/B, TUNER,
BAND,
GAME or
VIDEOiMD)
Switching
the VIDEO,'MD
fimction
(page 34)
Changing
CD power management
setting (page 17)
Tips
• The timer continues
to opmate
in Powm Saving
Mode.
I
• I/Q) indicator
lights up even in the Power Saving
Mode.
-t
g
c0
Da