Sony MHC-GNX80 Betriebsanleitung - Seite 20

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-GNX80 herunter. Sony MHC-GNX80 20 Seiten.

Seite drucken

Press TUNER MEMORY on the remote.

A preset number flashes in the display.

The stations are stored from preset

number 1.

Turn TUNING +/– clockwise or

counterclockwise (or press –. or

>+ on the remote repeatedly) to

select the preset number you want.

Press ENTER.

"Complete!" appears in the display. The

station is stored.

Repeat steps 1 to 6 to store other

stations.

Other operations

Tune in a station

with a weak signal

Stop scanning

during automatic

tuning

Cancel presetting

To improve tuner reception

When tuner reception is poor, set the CD power

manage function to "CD POWER OFF". The

default setting is "CD POWER ON".

Use buttons on the unit for the operation.

Press CD.

Press ?/1 to turn off the system.

Press ?/1 while holding x.

The system turns on automatically. "CD

POWER OFF" appears in the display.

Preset number

Do this

Follow the procedure described

in "Manual tuning preset" on

page 19.

Press x.

Press TUNER MEMORY on

the remote.

To set to "CD POWER ON"

Repeat the procedure above and "CD POWER

ON" appears in the display.

Notes

• When "CD POWER OFF" is selected, disc access

time is increased.

• You cannot change the CD power manage function

setting in the Power Saving Mode (page 36).

To change the AM tuning interval

(except for Saudi Arabian

models)

Use buttons on the unit for the operation.

The factory settings for AM tuning interval is

9 kHz (or 10 kHz for some areas). To change the

AM tuning interval, select any AM station first,

then turn off the system. While holding down

ENTER, press ?/1. The system turns on

automatically and "AM 10k STEP" or

"AM 9k STEP" appears in the display. When

you change the interval, all the AM preset

stations are erased. To reset the interval, repeat

the same procedure.

Note

You cannot change the AM tuning interval in the

Power Saving Mode (page 36).

Tips

• The preset stations are retained for half a day even if

you unplug the power cord or if a power failure

occurs.

• If you press TUNER/BAND while the system is

turned off, the system turns on automatically and

"TUNER" is selected as the function.

• You can also press FUNCTION on the remote

repeatedly to select "TUNER".