Sony MHC-GNX800 Betriebsanleitung - Seite 16
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-GNX800 herunter. Sony MHC-GNX800 40 Seiten. Sony mini hi-fi component system operating instructions
Seite drucken
4
Press N.
The tape starts playing.
*1
"RELAY" appears in the display Relay Play
follows this sequence, then stops:
Deck A (front side) t Deck B (front side)
Other operations
To
Do this
Stop playback
Press x.
Pause playback
Press X. Press X again to resume
playback.
Fast-forward or
Press m or M. To back to
rewind
normal playback, press N.
Remove a tape
Push A Z (Deck A) or B Z
(Deck B) when playback is
stopped.
Note
Do not push A Z (Deck A) or B Z (Deck B) while
playing a tape, otherwise the tape could be damaged.
Tips
• When a tape is inserted, corresponding presence
indicator lights up in the display.
• If you press TAPE A/B (or TAPE on the remote)
while the system is turned off, the system turns on
automatically and "TAPE A" or "TAPE B" is
selected as the function.
• If you press N during "TAPE A" function and there
is no tape in Deck A, the system automatically
switches to "TAPE B" function when there is a tape
in Deck B. Then, playback will start and vice versa.
• You can also press FUNCTION on the remote
repeatedly to select "TAPE A" or "TAPE B".
GB
16
Tape presence indicator
Front side indicator
Tape – Recording
Recording your favorite
tracks on a disc into a
tape
— CD Synchro Recording
You can record a whole disc into a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
1
Load a recordable tape into Deck B.
2
Press CD and load a disc you want to
record.
When you want to record an album of MP3
audio tracks, press PLAY MODE on the
remote repeatedly until "ALBM" lights up
in the display. Then press ALBUM +/–
repeatedly to select the album you want.
3
Press CD SYNC.
"SYNC" lights up in the display.
"REC" flashes in the display.
Deck B standby for recording.
4
Press REC PAUSE/START.
"REC" lights up in the display.
Recording starts.
To stop recording
Press x.
To record a disc by specifying
track order
— Program Edit
You can record tracks on all the discs in the
order you want using Program Play. Between
steps 2 and step 3 of "CD Synchro Recording"
(page 16), do steps 2 to 6 of "Creating your own
program" (page 12). When programming, make
sure the playing times do not exceed the length
of one side of the tape.
Note
You cannot listen to other sources while recording.