Sony MHC-RG441 Betriebsanleitung - Seite 24

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-RG441 herunter. Sony MHC-RG441 48 Seiten. Sony operating instructions owner's record mini hi-fi component system mhc-gx750, gx450, gx250, mhc-rg555, rg551s, rg444s, rg441, rg333, rg222, rg221, rg121, rg100, mhc-rx550
Auch für Sony MHC-RG441: Betriebsanleitung (47 seiten)

Seite drucken

Singing along

(MHC-RG555 only)

You can sing along by connecting an optional

microphone.

Turn MIC LEVEL on the unit to MIN to

turn down the microphone control

level.

Connect an optional microphone to

MIC.

Start playing the music.

Adjust the microphone volume by

turning MIC LEVEL on the unit.

After you have finished

Turn MIC LEVEL on the unit to MIN and

disconnect the microphone from MIC.

Mixing and recording sounds

You can "mix" sounds by playing one of the

components and singing or speaking into a

microphone (not supplied).

The mixed sound can be recorded on a tape.

Use buttons on the unit for the operation.

Prepare the source you want to mix.

Then, load a recordable tape in deck B

and press TAPE A/B repeatedly to

select deck B.

Press PLAY MODE repeatedly to select

g to record on one side. Select j

(or RELAY) to record on both sides.

Press the function button of the source

you want to record (e.g., CD).

When you want to record from TAPE A,

press TAPE A/B repeatedly until TAPE A

is selected.

Press REC PAUSE/START.

Deck B stands by for recording.

"REC" flashes.

Press REC PAUSE/START, and then

start singing, speaking or playing the

desired source.

Recording starts.

To stop recording

Press x.

Note

Microphone does not function while the tape deck is

performing the AMS operation (page 19).

Tips

• If acoustic feedback (howling) occurs, move the

microphone away from the speakers or change the

direction of the microphone.

• If you want to record your voice through the

microphone only, you can do so by selecting the CD

function and not playing a disc.

• When high level sound signals are input, the system

automatically adjusts the recording level to prevent

distortion of the recorded sound signal (Auto Level

Control function).