Sony MHC-V11 Betriebsanleitung - Seite 40

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-V11 herunter. Sony MHC-V11 44 Seiten. Home audio system

• BLUETOOTH devices connected with this

system must comply with the BLUETOOTH

specification prescribed by the Bluetooth

SIG, Inc., and must be certified to comply.

However, even when a device complies

with the BLUETOOTH specification, there

may be cases where the characteristics or

specifications of the BLUETOOTH device

make it impossible to connect, or may

result in different control methods, display

or operation.

• Noise may occur or the audio may

cut off depending on the BLUETOOTH

device connected with this system,

the communications environment, or

surrounding conditions.

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC

DISTORTION:

(The United States model only)

Left/Right Channel:

With 3 ohms loads, both channels

driven, from 120  10,000 Hz; rated

30 watts per channel minimum

RMS power, with no more than

0.7% total harmonic distortion from

250 milliwatts to rated output.

Speaker section

Speaker system:

Tweeter + Woofer

Tweeter L/R:

50 mm (2 in), cone type

Woofer:

200 mm (7 7/8 in), cone type

Inputs

AUDIO/PARTY CHAIN IN L/R:

Voltage 2 V, impedance 10 kilohms

MIC 1, MIC 2:

Sensitivity 1 mV, impedance

10 kilohms

Outputs

AUDIO/PARTY CHAIN OUT L/R:

Voltage 2 V, impedance 600 ohms