Sony MHC-VX222 Betriebsanleitung - Seite 35
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-VX222 herunter. Sony MHC-VX222 40 Seiten. Sony operating instructions mini hi-fi component system mhc-vx333/vx222
If other troubles not described above
occur, reset the system as follows:
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press x, ENTER, and ?/1 at the same
time.
4
Press ?/1 to turn on the system.
The system is reset to the factory settings. All
the settings you made are cleared.
Messages
One of the following messages may appear or
flash in the display during operation.
NO DISC
• There is no CD on the disc tray.
OVER
• You have reached the end of the CD.
Specifications
Amplifier section
MHC-VX333
The following measured at AC 120, 220, 240 V
50/60 Hz
DIN power output (rated) 100 + 100 watts
Continuous RMS power output (reference)
MHC-VX222
The following measured at AC 120, 220, 240 V
50/60 Hz
DIN power output (rated) 50 + 50 watts
Continuous RMS power output (reference)
Inputs
MD/VIDEO (AUDIO) IN (phono jacks):
GAME (AUDIO) IN (phono jack):
MIC 1/2 (mini jack):
Outputs
MD/VIDEO (AUDIO) OUT (phono jacks):
VIDEO OUT (phono jack):
S-VIDEO OUT (4-pin/mini-DIN jack):
PHONES (stereo mini jack):
SPEAKER:
(6 ohms at 1 kHz, DIN)
120 + 120 watts (6 ohms
at 1 kHz, 10% THD)
(6 ohms at 1 kHz, DIN)
60 + 60 watts (6 ohms at
1 kHz, 10% THD)
voltage 450/250 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
voltage 250 mV
impedance 1 kilohms
max. output level
1Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
Y: 1Vp-p, unbalanced,
Sync negative,
C: 0.286Vp-p,
load impedance 75 ohms
accepts headphones of
8 ohms or more
accepts impedance of 6 to
16 ohms
continued
35