Sony MHC-W555 Betriebsanleitung - Seite 40
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-W555 herunter. Sony MHC-W555 44 Seiten. Sony operating instructions mini hi-fi component system mhc-w555
Seite drucken
Specifications
Amplifier section
The following measured at AC 230 V, 50/60 Hz
DIN power output (rated)
Continuous RMS power output
The following measured at AC 120, 220, 240 V, 50/
DIN power output (rated)
Continuous RMS power output (reference)
Peak music power output 2000 watts
Inputs
Outputs
Video section
Inputs
Outputs
40
95 + 95 watts
(6 ohms at 1 kHz, DIN)
110 + 110 watts
(6 ohms at 1 kHz,
10% THD)
60 Hz
100 + 100 watts
(6 ohms at 1 kHz, DIN)
120 + 120 watts
(6 ohms at 1 kHz,
10% THD)
MD/VIDEO 1 IN (phono
jacks): voltage 450/250
mV, impedance 47
kilohms
AV INPUT AUDIO
(phono jacks):
voltage 250 mV,
impedance 47 kilohms
MIX MIC (phono jack):
sensitivity 1 mV,
impedance 10 kilohms
MD/VIDEO 1 OUT
(phono jacks): voltage
450/250 mV, impedance
1 kilohm
PHONES (stereo phone
jack): accepts headphones
of 8 ohms or more.
FRONT SPEAKER:
accepts impedance of 6 to
16 ohms
REAR SPEAKER: accepts
impedance of 16 ohms
SUPER WOOFER:
voltage 1 V, impedance
1 kilohm
AV INPUT VIDEO
(phono jack):
1 Vp-p, 75 ohms
MONITOR OUT
(phono jack):
1 Vp-p, 75 ohms
CD player section
System
Laser
Laser output
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
Output Level
Tape player section
Recording system
Frequency response
(DOLBY NR OFF)
Wow and flutter
Compact disc and digital
audio system
Semiconductor laser
(λ=780nm)
Emission duration:
continuous
Max. 44.6 µ W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
20 Hz – 20 kHz (±1 dB)
780 – 790 nm
More than 90 dB
More than 90 dB
600 nm
–18 dBm
4-track 2-channel stereo
40 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)