Sony MZ-R500 Betriebsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MZ-R500 herunter. Sony MZ-R500 40 Seiten. Marketing specifications
Auch für Sony MZ-R500: Betriebsanleitung (20 seiten), Betriebsanleitung (40 seiten), Eingeschränkte Garantie (1 seiten), Spezifikationen (2 seiten)

Seite drucken

If the recording does not start

• Make sure the recorder is not locked

(page 23).

• Make sure the MD is not record-protected

(page 31).

• Premastered MDs cannot be recorded over.

For models supplied with the AC plug

adaptor

If the AC power adaptor (supplied with the

European, Chinese and Argentine models only)

does not fit the wall outlet, use the AC plug

adaptor.

Notes

• If the power supply is disrupted (i.e. the

battery is removed or becomes exhausted or

the AC power adaptor is disconnected) during

a recording or editing operation, or while

"Edit" appears in the display, then it will not

be possible to open the lid until power is

restored.

• You can make a digital recording only from an

optical type output.

• When recording from a portable CD player,

set the CD player to pause, and then do the

recording procedure on the recorder.

• Note the following when recording from a

portable CD player:

—Some portable CD players may not be

capable of digital out unless powered by the

AC power.

—Connect the AC power adaptor to the

portable CD player and use it on AC power

as the power source.

—Disable any anti-skip function (such as

ESP

) on the portable CD player.

∗ Electronic Shock Protection

• LINE IN (OPTICAL) jack is for both digital

and analog input. The recorder automatically

recognizes the type of line cable and switches

to digital or analog input.

• The level of the recorded sound is adjusted

automatically.

• You can monitor the sound during recording.

Connect the supplied headphones/earphones

to i and adjust the volume by pressing VOL

+/–. This does not affect the recording level.

-GB