Sony MZ-R501 Betriebsanleitung - Seite 18

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MZ-R501 herunter. Sony MZ-R501 40 Seiten. Portable memory stick audio player / portable minidisc recorder / portable cd player
Auch für Sony MZ-R501: Betriebsanleitung (20 seiten), Eingeschränkte Garantie (1 seiten)

Seite drucken

To start/stop recording

in sync with the source

player

(Synchro-recording)

You can easily make digital recordings of

a digital source on an MD.

Before synchro-recording, make

connections to the digital source with a

digital cable, and insert a recordable MD.

REC

SELECT

>/.

Press MENU/ENTER while the

recorder is stopped.

Press SELECT >/. repeatedly

until "SYNC-R" flashes in the

display, and then press MENU/

ENTER.

"SYNC" lights up in the display.

"SYNC" does not lights up if optical

cable is not connected to the recorder.

CD players,

etc.

MENU/ENTER

SYNC indication

Press SELECT >/. repeatedly

until "ON" flashes in the display, and

then press MENU/ENTER.

Press N while pressing REC.

The recorder stands by for recording.

Play the source sound.

The recorder starts recording when it

receives the playing sound.

To stop recording

Press x.

• You cannot pause manually during synchro-

recording.

• When there is no sound from the player for

more than 3 seconds during synchro-

recording, the recorder goes into the standby

mode automatically. When the sound comes

from the player again, the recorder resumes

synchro-recording. If the recorder is kept in

the standby mode for 5 minutes or longer, the

recorder stops automatically.

• For longer recording, follow steps 1 to 3 of

"Recording for long times" (page 16) to select

the recording mode, and then start the

procedure of synchro-recording.

Notes

• Do not change the "SYNC-R" setting while

recording. Recording may not be done

properly.

• Even when there is no recorded sound on the

sound source, there may be cases when

recording does not pause automatically during

synchro-recording due to the noise level

emitted from the sound source.

• If a silent portion is encountered for 2 seconds

or more during synchro-recording, a new track

mark is automatically added at the point

where the silent portion ends.

• Synchro-recording cannot be done if the

connecting cord is not an optical cable.

• You cannot adjust the recording level

manually during synchro-recording.