Sony SRS-X99 Betriebsanleitung - Seite 24

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony SRS-X99 herunter. Sony SRS-X99 28 Seiten. Personal audio system
Auch für Sony SRS-X99: Startup-Handbuch (2 seiten), Startup-Handbuch (2 seiten), Betriebsanleitung (41 seiten)

Seite drucken



If the system is used within 10 m of a

wireless LAN device, turn off the

wireless LAN device.

Interference to other devices

Microwaves emitting from a BLUETOOTH

device may affect the operation of

electronic medical devices. Turn off the

system and other BLUETOOTH devices in the

following locations, as it may cause an

accident.



where inflammable gas is present, in a

hospital, train, airplane, or a gas station



near automatic doors or a fire alarm

 To be able to use the BLUETOOTH function, the

BLUETOOTH device to be connected requires the

same profile as the system's.

Note also that even if the same profile exists,

devices may vary in function depending on their

specifications.

 Due to the characteristic of BLUETOOTH wireless

technology, the sound played on the system is

slightly delayed from the sound played on the

BLUETOOTH device during talking on the

telephone or listening to the music.

 This system supports security capabilities that

comply with the BLUETOOTH standard to

provide a secure connection when the

BLUETOOTH wireless technology is used, but

security may not be enough depending on the

setting. Be careful when communicating using

BLUETOOTH wireless technology.

 We do not take any responsibility for the leakage

of information during BLUETOOTH

communication.

 A device featuring the BLUETOOTH function is

required to conform to the BLUETOOTH standard

specified by Bluetooth SIG, and be

authenticated. Even if the connected device

conforms to the above mentioned BLUETOOTH

standard, some devices may not be connected

or work correctly, depending on the features or

specifications of the device.

 Noise or sound skips may occur depending on

the BLUETOOTH device connected with the

system, the communication environment or the

usage environment.

Specifications

Section for Speaker

Speakers

Super tweeter: Approx. 20 mm

diameter × 2

Midrange: Approx. 40 mm diameter × 2

Subwoofer: Approx. 69 mm diameter × 1

Section for Amplifier

POWER OUTPUT AND TOTAL HARMONIC

DISTORTION:

Power Output (reference)

Super tweeter: 15 W × 2 (at less than 10 %

harmonic distortion, 10 kHz)

Midrange: 15 W × 2 (at less than 10 %

harmonic distortion, 1 kHz)

Subwoofer: 30 W (at less than 10 %

harmonic distortion, 100 kHz)

Section for Network

Compatible standards

IEEE 802.11 a/b/g/n (WEP 64 bit,

WEP 128 bit, WPA/WPA2-PSK (AES), WPA/

WPA2-PSK (TKIP))

Radio frequency

2.4/5 GHz band

Section for BLUETOOTH

Output

BLUETOOTH Specification Power Class 2

Maximum communication range

Line of sight Approx. 10 m*

Radio frequency

2.4 GHz band (2.4000 GHz – 2.4835 GHz)

Communication System

BLUETOOTH Specification Version 3.0

Compatible BLUETOOTH Profiles*

A2DP (Advanced Audio Distribution

Profile) / AVRCP (Audio Video Remote

Control Profile)

Supported codec*

SBC*

/ AAC*

/ LDAC*

Transmission bandwidth (A2DP)

20 Hz – 20,000 Hz (with 44.1 kHz sampling)