Sony SS-GSX100 Betriebsanleitung - Seite 39

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony SS-GSX100 herunter. Sony SS-GSX100 44 Seiten. Sony operating instructions mini hi-fi component system mhc-gsx100w, mhc-gsx75

Seite drucken

To save a tape permanently

To prevent a tape from being accidentally recorded

over, break off the cassette tab from side A or B as

illustrated.

Break off the

cassette tab

If you later want to reuse the tape for recording, cover

the broken tab with adhesive tape.

Before placing a cassette in the tape

deck

Take up any slack in the tape. Otherwise, the tape may

get entangled in the parts of the tape deck and become

damaged.

When using a tape longer than

90 minutes

The tape is very elastic. Do not change the tape

operations such as play, stop, and fast-winding

frequently. The tape may get entangled in the tape

deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.

Be sure to clean the tape heads before you start an

important recording or after playing an old tape.

Use a separately sold dry-type or wet-type cleaning

cassette. For details, refer to the instructions of the

cleaning cassette.

Demagnetising the tape heads

Demagnetise the tape heads and the metal parts that

have contact with the tape after every 20 to 30 hours of

use with a separately sold demagnetising cassette. For

details, refer to the instructions of the demagnetising

cassette.

Specifications

Main Unit

(HCD-GSX100W/GSX75)

Amplifier section

MHC-GSX100W/GSX75

For the U.S. model

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC

DISTORTION:

With 6-ohm loads, both channels driven, from

120 – 10,000 Hz; rated 200 watts (for

GSX100W), 150 watts (for GSX75) per channel

minimum RMS power, with no more than 10%

total harmonic distortion from 250 milliwatts to

rated output.

MHC-GSX100W

Continuous RMS power output (reference):

Total harmonic distortion less than 0.09% (6 ohms at

MHC-GSX75

Continuous RMS power output (reference):

Total harmonic distortion less than 0.09% (6 ohms at

Inputs

VIDEO (MD) IN (phono jacks):

AUDIO IN (phono jacks): 450 mV, impedance 47

Outputs

VIDEO OUT (phono jacks):

PHONES (stereo phone jack):

SPEAKER:

200 + 200 W

(6 ohms at 1 kHz, 10%

THD)

1 kHz, 125 W)

150 + 150 W

(6 ohms at 1 kHz, 10%

THD)

1 kHz, 70 W)

voltage 250/450 mV,

impedance 47 kilohms

kilohms

max. output level 1Vp-p,

unbalanced, Sync

negative, load impedance

75 ohms

accepts headphones of

8 ohms or more

accepts impedance of 6 to

16 ohms

continued