Cisco ASA 5540 Schnellstart-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware Cisco ASA 5540 herunter. Cisco ASA 5540 40 Seiten. Asa 5500 series adaptive security appliance

Seite drucken

Chapter 2

Installing the ASA 5510, ASA 5520, or ASA 5540

Powering On the ASA

Step 1

Step 2

Step 3

Step 4

Step 5

Connecting Interface Cables and Verifying Interface

Connectivity

Note

Step 1

Step 2

78-19753-01

Attach the power cable to the rear panel of the ASA.

Connect the power cable to an electrical outlet.

Power on the ASA.

Check the Power LED on the front of the ASA; if it is solid green, the device is

powered on.

Check the Status LED on the front of the adaptive security appliance; once it is

solid green, the system has passed power-up diagnostics.

The illustration in this section shows the ASA 5540. The ASA 5510 and ASA

5520 chassis are identical, containing the same back panel features and indicators.

Connect a management PC to the Management 0/0 interface for use with the

Adaptive Security Device Manager (ASDM).You can connect it directly with an

Ethernet cable, or connect the PC and the ASA to the same management network.

Make sure the PC is configured to obtain an IP address using DHCP.

If you want to use the CLI, connect your PC to the console port and see

Note

the CLI configuration guide more information.

Connect your networks to the appropriate ports.

Cisco ASA 5580 Series Quick Start Guide

Powering On the ASA

2-3