Sony ST-SDE700 Betriebsanleitung - Seite 27

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony ST-SDE700 herunter. Sony ST-SDE700 32 Seiten. Dab/fm/am tuner

Seite drucken

On placement

• Do not place heavy objects on the tuner

which might cause malfunctions.

• Place the tuner in a location with adequate

ventilation to prevent heat buildup and

prolong the life of the tuner.

• Do not place the tuner near heat sources, or

in a place subject to direct sunlight,

excessive dust, or mechanical shock.

• Do not place the tuner near equipment such

as a television, VCR, or tape deck. (If the

tuner is being used in combination with a

television, VCR, or tape deck, and is placed

too close to that equipment, noise may

result, and picture quality may suffer. This is

especially likely when using an indoor

antenna. Therefore, we recommend using an

outdoor antenna.)

• Use caution when placing the tuner on

surfaces that have been specially treated

(with wax, oil, polish, etc.) as staining or

discoloration of the surface may result.

On operation

Before connecting other components, be sure

to turn off and unplug the tuner.

On cleaning

Clean the cabinet, panel, and controls with a

soft cloth slightly moistened with a mild

detergent solution. Do not use any type of

abrasive pad, scouring powder, or solvent,

such as alcohol or benzine.

If you have any questions or problems

concerning your tuner, please consult your

nearest Sony dealer.

Troubleshooting

If you experience any of the following

difficulties while using the tuner, use this

troubleshooting guide to help you remedy the

problem. Should any problem persist, consult

your nearest Sony dealer.

There's no sound.

• Connect the antennas.

• Set the source setting on the amplifier to

TUNER.

• Connect the tuner to the amplifier using an

audio cord (page 12) or optical digital cord

(page 11).

• The specified station has temporarily

stopped broadcast.

• Perform the DAB INITIAL SCAN

procedure (page 15).

• FM/AM broadcast signals are not output

from the DIGITAL DAB OPTICAL OUT

jack.

You cannot tune in a frequency.

• Adjust the position of the antenna.

• Connect an external antenna for DAB/FM/

AM broadcasts.

• Preset the stations again if you have

moved.

There is severe hum and/or

background noise.

• Adjust the position or direction of the

antenna.

• Tune to a correct frequency.

• Connect an external antenna for DAB/FM/

AM broadcasts.

• Move the tuner away from the source of

the noise.

RDS isn't working.

• Make sure that you tune in an FM station.

• Select a stronger FM station.

continued