Sony STR-DH130 Betriebsanleitung - Seite 30

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony STR-DH130 herunter. Sony STR-DH130 36 Seiten. Fm stereo / fm-am receiver
Auch für Sony STR-DH130: Handbuch zur Schnelleinrichtung (2 seiten), Spezifikationen (2 seiten), Eingeschränkte Garantie (1 seiten), Service-Handbuch (36 seiten), Betriebsanleitung (35 seiten), Service-Handbuch (36 seiten)

Seite drucken

Troubleshooting

If you experience any of the following

difficulties while using the receiver, use this

troubleshooting guide to help you remedy the

problem. Should any problem persist, consult

your nearest Sony dealer. Note that if service

personnel changes some parts during repair,

these parts may be retained.

Power

The receiver is turned off

automatically.

• "AUTO.STBY" is set to "STBY ON"

(page 27).

• The Sleep Timer function is working

(page 11).

Sound

There is no sound from one of the

speakers.

• Connect a pair of headphones to the

PHONES jack to verify that sound is

output from the headphones. If only one

channel is output from the headphones, the

equipment may not be connected to the

receiver correctly. Check that all the cords

are fully inserted into the jacks on both the

receiver and the equipment. If both

channels are output from the headphones,

the speaker may not be connected to the

receiver correctly. Check the connection of

the speaker which is not outputting any

sound.

• Make sure you have connected to both the

L and R jacks of an analog equipment,

analog equipment requires both L and R

jack connections. Use an audio cord (not

supplied).

There is no sound from a specific

equipment.

• Check that the equipment is connected

correctly to the audio input jacks for that

equipment.

• Check that the cord(s) used for the

connection is (are) fully inserted into the

jacks on both the receiver and the

equipment.

There is no sound, no matter which

equipment is selected, or only a very

low-level sound is heard.

• Check that all connecting cords are

inserted to their input/output jacks for the

respective jacks of the receiver, speakers

and the equipment.

• Check that both the receiver and all

equipment are turned on.

• Check that MASTER VOLUME is not set

to "VOL MIN".

• Check that the SPEAKERS (OFF/A/B/

A+B) is not set to "OFF".

• Check that headphones are not connected.

• Press MUTING to cancel the muting

function.

• Try pressing the input button on the remote

control or turning INPUT SELECTOR on

the receiver to select the equipment of

your choice (page 20).

• The protective device on the receiver has

been activated. Turn off the receiver,

eliminate the short-circuit problem, and

turn on the power again.

There is severe hum or noise.

• Check that the speakers and equipment are

connected securely.

• Check that the connecting cords are away

from a transformer or motor, and at least

3 meters (10 feet) away from a TV set or

fluorescent light.

• Move your audio equipment away from

the TV.

• The plugs and jacks are dirty. Wipe them

with a cloth slightly moistened with

alcohol.