E:\Working\2693038211\269303821MEXBT5000U\01US02CD-U.fm
01US+00COV-U.book Page 26 Thursday, April 27, 2006 11:03 PM
Error displays/Messages
Audio function
Blank Disc
Tracks have not been recorded on the MD.
t Play an MD with recorded tracks.
Error
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• The disc cannot play due to a problem.
t Insert another disc.
Failure (Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this model to
check the connection.
FAILURE (Illuminates for about 1 second.)
When the XM tuner is connected, storing an XM radio
channel into a preset failed.
t Be sure to receive the channel that you want to
store, then try it again.
Load
The changer is loading the disc.
t Wait until loading is complete.
Local Seek +/–
The local seek mode is on during automatic tuning.
NO Disc
The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.
NO Disc Name
A disc name is not written in the track.
NO Group Name
A group name is not written in the track on the ATRAC
CD.
NO ID3 Tag
ID3 tag information is not written in the MP3 file.
NO Information
Text information is not written in the ATRAC3/
ATRAC3plus or WMA file.
NO Magazine
The disc magazine is not inserted in the CD changer.
t Insert the magazine in the changer.
NO Music
The disc is not a music file.
t Insert a music CD in this unit or MP3 playable
changer.
NO Track Name
A track name is not written in the track.
Offset
There may be an internal malfunction.
t Check the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
Read
The unit is reading all track and group information on
the disc.
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
26
Push Reset
The CD unit and CD/MD changer cannot be operated
due to a problem.
t Press the RESET button (page 4).
"
" or "
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
"
"
The character cannot be displayed with the unit.
Bluetooth function
Busy
The Bluetooth process is not complete.
t Discontinue receiving the phonebook data.
t Stop the current operation and wait for a while.
Connection Complete
The Bluetooth connection is complete.
Connection Failed
Cannot be connected to the device because the input
passcode is incorrect.
Disconnected
The Bluetooth signal is disconnected.
Empty
• There is no data in "Dialed Calls," "Received Calls"
or "Phonebook" in the CALL menu.
• There is no data in the phonebook when storing to the
Preset Dial.
Error
The phonebook data cannot be received due to a
problem.
HF Device is not available
Handsfree device is not connected.
Invalid Code
The input security code is incorrect.
Memory Full
• The phonebook memory of this unit became full
while the phonebook data is received.
• The phonebook memory of this unit is full.
Not Available
The Bluetooth audio device cannot be used because the
Bluetooth signal is disconnected.
No Devices Found
• No connectable device is found after searching.
• The device is not registered in "Handsfree Devices"
or "Audio Devices."
t Register the device in "Handsfree Devices" or
"Audio Devices."
Security Locked
Security is set.
Time Out
The time limit for connection has been exceeded.
Turn ON Bluetooth
The Bluetooth setting is off.
t Set the Bluetooth setting to on.
masterpage:Left
"
MEX-BT5000
2-693-038-21 (1)
Seite drucken