Sony ZS-H10CP Betriebsanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony ZS-H10CP herunter. Sony ZS-H10CP 11 Seiten. Personal audio system
Auch für Sony ZS-H10CP: Betriebsanleitung (2 seiten), Spezifikationen (2 seiten)

Seite drucken

Power-Cord Protection - Route the power

cord so that it is not likely to be walked on

or pinched by items placed upon or against

them, paying particular attention to the

plugs, receptacles, and the point where the

cord exits from the appliance.

0 0 0 '

'J\

Attachments - Do not use attachments not

recommended by Sony, as they may cause

hazards.

Lightning - For added protection for this

appliance during a lightning storm, or

when it is left unattended and unused for

long periods of time, unplug it from the

wall outlet and disconnect the antenna or

cable system. This will prevent damage to

the appliance due to lightning and

powerline surges.

Cleaning - Unplug the appliance from the

wall outlet before cleaning or polishing it.

Do not use liquid cleaners or aerosol

cleaners. Use a cloth lightly dampened with

water for cleaning the exterior of the

appliance. Clean the appliance only as

recommended by Sony.

Object and Liquid Entry - Never push

objects of any kind into the appliance

through openings as they may touch

dangerous voltage points or short out parts

that could result in a fire or electric shock.

Never spill liquid of any kind on the

appliance.

A N T E N N A S - - - - - - - - - - - - - - - - - - - - - - -

Antenna Grounding According to the National Electrical Code

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Electric Servic:=i

Grounding Conductors

Equipment

(NEC Section 810-21)

fF4--'=-

Ground Clamps

Power Service Grounding

Electrode System

(NEC Art 250 Part H)

EC -NATlONAL ELECTRICAL CODE

Outdoor Antenna Grounding - If an outdoor antenna or cable

system is installed, follow the precautions below.

Be sure the antenna system is grounded so as to provide some

protection against voltage surges and built-up static charges. Section

810 of the

ational Electrical Code provides information with respect

to proper grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding electrode.

An outdoor antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or

where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,

EXTREME CARE SHOULD BE TAKE

TO KEEP FROM

CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT

WITH THEM IS ALMOST INVARIABLY FATAL.

S E R V I C E - - - - - - - - - - - - - - - - - - - - - - - - -

322919201(1)

Servicing - Do not attempt to service the

appliance yourself as opening or removing

covers may expose you to dangerous

voltage or other hazards. Refer all servicing

to qualified service personnel.

Replacement parts - When replacement

parts are required, be sure the service

technician has used replacement parts

specified by Sony that have the same

characteristics as the original parts.

Unauthorized substitutions may result in

fire, electric shock, or other hazards.

Safety Check - Upon completion of any

service or repairs to the appliance, ask the

service technician to perform routine safety

checks(as specified by Sony) to determine

that the appliance is in safe operating

condition

~-==::-:-

7_--'"

- If

the appliance has been subject to

excessive shock by being dropped, or the

cabinet has been damaged.

- If

the appliance docs not operate

normally when following the operating

instructions, adjust only those controls that

are specified in the operating instructions.

Improper adjustment of other controls may

result in damage and will often require

extensive work by a qualified technician to

restore the appliance to normal operation.

- The appliance does not appear to operate

normally or exhibits a marked change in

performance. - This indicates a need for

service.

~::l·~Iii·

·=====~:::

- If

liquid has been spilled or objects have

fallen into the appliance.

- If

the appliance has been exposed to rain

or water.

Damage Requiring Service - Unplug the

appliance from the wall outlet and refer

servicing to qualified service personnel

under the following conditions:

- When the power cord or plug is

damaged or frayed.