Sony ZS-S4IP Betriebsanleitung

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony ZS-S4IP herunter. Sony ZS-S4IP 2 Seiten. Personal audio system
Auch für Sony ZS-S4IP: Betriebsanleitung (2 seiten), Betriebsanleitung (2 seiten), Betriebsanleitung (2 seiten), Betriebsanleitung (2 seiten)

Seite drucken

Personal Audio System

ZS-S4iP

Printed in China

WARNING

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

To reduce the risk of fire, do not cover the ventilation of the

This symbol on the product or on its packaging indicates that

this product shall not be treated as household waste. Instead it

apparatus with newspapers, tablecloths, curtains, etc. And do

not place lighted candles on the apparatus.

shall be handed over to the applicable collection point for the

recycling of electrical and electronic equipment. By ensuring

To reduce the risk of fire or electric shock, do not expose this

this product is disposed of correctly, you will help prevent

apparatus to dripping or splashing, and do not place objects

potential negative consequences for the environment and

filled with liquids, such as vases, on the apparatus.

human health, which could otherwise be caused by

As the main plug is used to disconnect the unit from the

inappropriate waste handling of this product. The recycling of

mains, connect the unit to an easily accessible AC outlet.

materials will help to conserve natural resources. For more

Should you notice an abnormality in the unit, disconnect the

detailed information about recycling of this product, please

main plug from the AC outlet immediately.

contact your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Do not install the appliance in a confined space, such as a

Applicable accessories: Remote control

bookcase or built-in cabinet.

Do not expose the batteries (battery pack or batteries installed)

to excessive heat such as sunshine, fire or the like for a long

time.

Excessive sound pressure from earphones and

headphones can cause hearing loss.

Power sources





Connect the AC power cord  or insert six R14 (size C) batteries (not supplied) into the battery compartment .

Notes



• Replace the batteries when the OPR/BATT indicator

dims or when the player stops operating.

Replace all the batteries with new ones. Before you replace the batteries, be sure to remove the CD from the player.

• To use the player on battery power, disconnect the AC power cord from the player.

Preparing the remote

Insert two R6 (size AA) batteries (not supplied).

Replacing batteries

With normal use, the batteries for the remote should last about six months. When the remote no longer operates the

unit, replace all the batteries with new ones.

Before using the unit

Falling asleep to music

To turn on/off the power

Play the music source you want.

Press OPERATE



Press SLEEP

To adjust the volume

Press SLEEP

until the player goes off automatically.

Press VOLUME +, –



Each time you press the button, the indication

To listen through headphones

changes as follows:

Connect the headphones to the  (headphones) jack



"60"  "90"  "120"  "OFF"  "10"  "20"

 "30".

To reinforce the bass sound

Press MEGA BASS



on the remote.

To cancel the sleep function

"MEGA BASS" appears in the display.

Press OPERATE

To return to normal sound, press the button again.



SLEEP

step 3.

Disposal of waste batteries

4-107-422-39(1)

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates that

the battery provided with this product shall not be treated as

household waste.

On certain batteries this symbol might be used in combination

with a chemical symbol. The chemical symbols for mercury

(Hg) or lead (Pb) are added if the battery contains more than

0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of correctly, you will

help prevent potentially negative consequences for the

environment and human health which could otherwise be

caused by inappropriate waste handling of the battery. The

recycling of the materials will help to conserve natural

resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualified service staff only.

To ensure that the battery will be treated properly, hand over

the product at end-of-life to the applicable collection point for

Operating Instructions

the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the battery

over to the applicable collection point for the recycling of waste

batteries.

For more detailed information about recycling of this product

Disposal of Old Electrical & Electronic

or battery, please contact your local Civic Office, your

Equipment

household waste disposal service or the shop where you

(Applicable in the European Union and

purchased the product.

other European countries with separate

Notice for customers: the following

collection systems)

information is only applicable to

equipment sold in countries applying

EU Directives

The manufacturer of this product is Sony Corporation,

1-7-1 Konan, Minato-ku, Tokyo, Japan.

The Authorized Representative for EMC and product

safety is Sony Deutschland GmbH, Hedelfinger Strasse

61, 70327 Stuttgart, Germany. For any service or

guarantee matters please refer to the addresses given in

separate service or guarantee documents.

Notes on DualDiscs

A DualDisc is a two sided disc product which mates DVD

recorded material on one side with digital audio material on

the other side. However, since the audio material side does not

conform to the Compact Disc (CD) standard, playback on this

product is not guaranteed.

Specifications

CD player section

System

Compact disc digital audio system

Laser diode properties

Emission duration: Continuous

Laser output: Less than 44.6 µW

(This output is the value measurement at a distance of 200 mm from the

objective lens surface on the optical pick-up block with 7 mm aperture.)

Number of channels

Frequency response

20 - 20,000 Hz +1/–2 dB

Wow and flutter

to AC IN

to a wall outlet

Below measurable limit

iPod section

DC out: 5V

MAX: 500mA

(AC only)

Radio section

Frequency range

FM: 87.5 - 108 MHz

AM: 531-1,611kHz (9kHz step)

530-1,610kHz (10kHz step)

FM: 128 kHz

AM: 45 kHz

Antennas

FM: Telescopic antenna

AM: Built-in ferrite bar antenna

General

Speaker

Full range: 8 cm (3

inches) dia., 16 Ω, cone type (2)

Outputs

Headphones jack (stereo minijack):

For 16 - 32 Ω impedance headphones

Input

AUDIO IN jack (stereo minijack)

Power output

2 W + 2 W (at 16 Ω, 10% harmonic distortion)

Power requirements

For player:

230V AC,50Hz

9 V DC, 6 R14 (size C) batteries

Power consumption

AC 16 W

Battery life

For player:

FM reception

Sony R14P: approx. 4 h

Sony alkaline LR14: approx. 16 h



on the remote to display "SLEEP. "

CD playback

Sony R14P: approx. 2 h



on the remote to select the minutes

Sony alkaline LR14: approx. 8 h

Dimensions

Approx. 400 × 169.7 × 224 mm (w/h/d)

(15

× 6

× 8

inches) (incl. projecting parts)

Mass

Approx. 3.4 kg (7 lb. 8 oz) (incl. batteries)

Supplied accessory

AC power cord (1)

Remote control (1)

Exchangeable lid (1)



to turn off the power, or press

repeatedly to set the sleep timer to "OFF" in

Design and specifications are subject to change without notice.

Optional accessory

Sony MDR headphones series

Music discs encoded with copyright

Precautions

protection technologies

This product is designed to playback discs that conform to the

Compact Disc (CD) standard. Recently, various music discs

Discs that this unit CAN play

encoded with copyright protection technologies are marketed

• Audio CD

by some record companies. Please be aware that among those

• CD-R/CD-RW (CD-DA*)

discs, there are some that do not conform to the CD standard

* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a

recording standard used for Audio CDs.

and may not be playable by this product.

Discs that this unit CANNOT play

• CD-R/CD-RW other than those recorded in music CD format

• CD-R/CD-RW of poor recording quality, CD-R/CD-RW that has

scratches or are dirty, or CD-R/CD-RW recorded with an

incompatible recording device

• CD-R/CD-RW which is finalized incorrectly

Notes on discs

• Before playing, clean the CD with a

cleaning cloth. Wipe the CD from the

center out. If there is a scratch, dirt or

fingerprints on the CD, it may cause

tracking errors.

• Do not use solvents such as benzine, thinner, commercially available

cleaners or anti-static spray intended for vinyl LPs.

• Do not expose the CD to direct sunlight or heat sources such as hot

air ducts, nor leave it in a car parked in direct sunlight, as there can

be a considerable rise in temperature inside the car.

• Do not stick paper or stickers on the CD, nor scratch the surface of

the CD.

• After playing, store the CD in its case.

On safety

• As the laser beam used in the CD player section is harmful to the

eyes, do not attempt to disassemble the casing. Refer servicing to

qualified personnel only.

• Should any solid object or liquid fall into the player, unplug the

player, and have it checked by qualified personnel before operating

it any further.

• Discs with non-standard shapes (e.g., heart, square, star) cannot be

played on this player. Attempting to do so may damage the player.

Do not use such discs.

On power sources

• For AC operation, use the supplied AC power cord; do not use any

other type.

• The player is not disconnected from the AC power source (mains)

as long as it is connected to the wall outlet, even if the player itself

has been turned off.

• Unplug the player from the wall outlet when it is not to be used for

an extended period of time.

• When the batteries are not to be used, remove them to avoid

damage that can be caused by battery leakage or corrosion.

• The nameplate and important information concerning safety are

located on the bottom exterior.

On placement

• Do not leave the player in a location near heat sources, in a place

subject to direct sunlight, excessive dust, or mechanical shock, or in

a car subject to the direct rays of the sun.

• Do not place the player on an inclined or unstable place.

• Do not place anything within 10 mm of the side of the cabinet. The

ventilation holes must be unobstructed for the player to operate

properly and prolong the life of its components.

• Since a strong magnet is used for the speakers, keep personal credit

cards using magnetic coding or spring-wound watches away from

the player to prevent possible damage from the magnet.

On operation

• If the player is brought directly from a cold to a warm location, or is

placed in a very damp room, moisture may condense on the lens

inside the CD player section. Should this occur, the player will not

operate properly. In this case, remove the CD and wait about an

hour for the moisture to evaporate.

Cleaning the cabinet

• Clean the cabinet, panel and controls with a soft cloth slightly

Compatible iPod models

moistened with a mild detergent solution. Do not use any type of

The compatible iPod models are as follows. Update your iPod to use the

abrasive pad, scouring powder, or solvent, such as alcohol or

latest software before you use it.

benzine.

If you have any questions or problems concerning your player, please

consult your nearest Sony dealer.

iPod nano

5th generation

iPhone 3GS

iPod touch

(video camera)

2nd generation

iPod nano

4th generation

iPhone 3G

iPod touch

(video)

1st generation

iPod nano

3rd generation

(video)

iPod classic

iPhone

iPod nano

2nd generation

1st generation

iPod

(aluminum)

5th generation

(video)

iPod mini

iPod

4th generation

(color display)

Troubleshooting

General

The power is not on.

• Connect the AC power cord to the wall outlet securely.

• Make sure the batteries are inserted correctly.

• Replace all the batteries with new ones if they are weak.

• When you operate the unit on batteries, you cannot turn on the unit



using OPERATE

on the remote.

There is no audio.

• Unplug the headphones when listening through speakers.

Noise is heard.

• Someone is using a portable telephone or other equipment that

emits radio waves near the player.

 Move the portable telephone, etc., away from the player.

iPod

There is no audio.

• Make sure the iPod is connected firmly.

• Adjust the VOLUME +, −



Operation is impossible.

• Make sure the iPod is connected firmly.

Cannot charge iPod.

• You cannot charge the iPod when the unit is using DC power

supply.

• You cannot charge the iPod when "DC OUT" does not appear on

the display in radio mode.

CD player

The CD does not play or "no dISC" is displayed even when a

CD is in place.

• Place the CD with the label surface up.

• Clean the CD.

• Take out the CD and leave the CD compartment open for about an

hour to dry moisture condensation.

• The CD-R/CD-RW is blank.

• There is a problem with the quality of the CD-R/CD-RW, recording

device or application software.

• Replace all the batteries with new ones if they are weak.

The sound drops out.

• Reduce the volume.

• Clean the CD, or replace it if the CD is badly damaged.

• Place the player in a location free from vibration.

• Clean the lens with a commercially available blower.

• The sound may drop out or noise may be heard when using poor

quality CD-Rs/CD-RWs, or if there is a problem with the recording

device or application software.

Radio

Reception is poor.

• Reorient the antenna

to improve FM

reception.

• Reorient the player

itself to improve AM

reception.

The audio is weak or has poor quality.

• Replace all the batteries with new ones if they are weak.

• Move the player away from the TV.

The picture of your TV becomes unstable.

• If you are listening to an FM program near the TV with an indoor

antenna, move the player away from the TV.

Remote

The remote does not function.

• Replace all the batteries in the remote with new ones if they are

weak.

• Make sure that you are pointing the remote at the remote sensor on

the unit.

• Remove any obstacles in the path of the remote and the unit.

• Make sure the remote sensor is not exposed to strong light such as

direct sunlight or fluorescent lamp light.

• Move closer to the unit when using the remote.

After trying the remedies, if you still have problems, unplug the AC

power cord or remove all the batteries. After all the indications in the

display disappear, plug the AC power cord in or insert the batteries

again. If the problem persists, please consult your nearest Sony dealer.