Digitimer D188 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Laborausrüstung Digitimer D188 herunter. Digitimer D188 20 Seiten. Remote electrode selector

Seite drucken

Digitimer Ltd – D188 Operator's Manual

Section 3

Software Overview

Introduction

The D188 Control App Software is a virtual front panel for the D188 and allows the operator to manually

switch channels using a left mouse click or keyboard number keys. The software also controls the

operating modes of the D188, whether the LEDs associated with an active channel are illuminated and

the Delay/De-bounce setting.

If multiple D188's are connected to the host PC, a narrow, vertical green bar moves between respective

D188 panels to show which D188 is being managed (by the number keys) at a particular time.

The D188 has three modes of operation and a standby setting. Modes are selected via a left mouse click

on the mode button of choice. A green bar will highlight the active mode. Additional features and modes

of operation are discussed in greater detail below.

Standby

When the D188 Control Software is first run, with a D188 connected to the PC via the USB

cable, the software indicates the presence of a D188 by displaying the device ID (serial

number) near the top left of the window and adding a green highlight to the Standby button

icon, confirming the D188 is in standby. The D188 will not allow any stimuli to pass through it

until one of the other operating modes below is selected.

Version 1.2