How to Configure Clear Channel T3/E3 Controllers and Channelized T1/E1 Controllers
Command or Action
Step 6
end
or
commit
Example:
RP/0/RSP0/CPU0:router(config-t1-channel_group)#
end
or
RP/0/RSP0/CPU0:router(config-t1-channel_group)#
commit
Step 7
exit
Example:
RP/0/RSP0/CPU0:router(config-t1-channel_group)#
exit
Step 8
exit
Example:
RP/0/RSP0/CPU0:router(config-t1)# exit
Step 9
exit
Example:
RP/0/RSP0/CPU0:router(config)# exit
Step 10
bert [t1 | e1] interface-path-id [channel-group
channel-group-number] [error] start
Example:
RP/0/RSP0/CPU0:router# bert t1 0/3/0/0/0 start
RP/0/RSP0/CPU0:router# bert t1 0/3/0/0/0 error
Cisco ASR 9000 Aggregation Services Router Interface and Hardware Component Configuration Guide
480
Configuring Clear Channel T3/E3 and Channelized T3 and T1/E1 Controllers on the Cisco ASR 9000 Series Router
Purpose
Saves configuration changes.
•
When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
–
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
–
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
•
changes to the running configuration file and remain
within the configuration session.
Exits channel group configuration mode.
Exits T1 or E1 configuration mode.
Exits global configuration mode.
Starts the configured BERT test on the specified channel
group.
You can include the optional error keyword to
Note
inject errors into the running BERT stream.
OL-32684-01
Seite drucken