Cisco ASR 9000 Series Handbuch - Seite 18

Blättern Sie online oder laden Sie pdf Handbuch für Netzwerk-Hardware Cisco ASR 9000 Series herunter. Cisco ASR 9000 Series 44 Seiten. Line card
Auch für Cisco ASR 9000 Series: Konfigurieren der Netzwerkeinstellungen (26 seiten), Konfigurationshandbuch (46 seiten), Konfigurationshandbuch (50 seiten), Handbuch (24 seiten), Konfigurieren von (46 seiten), Kurzreferenz-Handbuch (7 seiten)

Seite drucken

Reconnecting AC Power

Step 3

Loosen the retainer bracket holding the AC power cords to the power tray receptacle.

Step 4

Unplug the AC power cords from the power tray receptacles.

Reconnecting AC Power

Follow these steps to reconnect an individual AC power cord to a power tray:

Procedure

Step 1

Power OFF (0) the circuit breaker assigned to the AC power source you are reconnecting.

Step 2

Plug the AC power cord into the power tray receptacle.

Step 3

Close and tighten the retainer bracket holding the AC power cord to the power tray receptacle.

Step 4

Power on the AC power source circuit breaker.

Caution

Reconnecting AC Power

If power has been totally disconnected from the router, follow these steps to reconnect AC power to the AC

power tray:

Procedure

Step 1

Verify that the power switch at the rear of the Version 1 AC power tray is set to the OFF (0) position. For

Version 2 and Version 3 AC power trays, verify that the power switch at the front of the power tray set to the

OFF (0) position.

Step 2

Check that the circuit breaker assigned to the AC power source you are connecting is set to OFF (0).

Caution

Step 3

Plug the AC power cords into the power tray receptacle

Step 4

Close the retainer bracket to secure the AC power cord plug to the power tray receptacle.

Step 5

Power on the AC power source circuit breaker.

Step 6

Set the power switch at the rear of the AC power tray to the ON (1) position.

Caution

Replacing Cisco ASR 9000 Series Router Components

Do not turn off the switch on the power tray to reconnect AC power cords. An individual AC power

cord can be plugged in while the system is powered from other AC power sources.

To ensure that power remains off while you are performing this procedure, lock-out/tag-out the

circuit breaker switch in the OFF (0) position until you are ready to turn it on.

The following procedure is only to be used when reconnecting power to all power trays in a system

that has been powered down completely.

Replacing Cisco ASR 9000 Series Router Components

(Figure

1).