Cisco ATA 191 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Netzwerk-Hardware Cisco ATA 191 herunter. Cisco ATA 191 30 Seiten. Analog telephone adapter
Auch für Cisco ATA 191: Handbuch für die Verwaltung (4 seiten), Benutzerhandbuch (10 seiten), Los geht's (8 seiten), Handbuch (10 seiten), Schnellstart-Handbuch (13 seiten), Setup-Handbuch (6 seiten), Benutzerhandbuch (40 seiten), Benutzerhandbuch (30 seiten)

Get Started with Your New ATA

Insecure mounting might damage the ATA or cause injury. Cisco is not responsible for damages incurred

Note

byinsecure wall-mounting.

Procedure

Step 1

Determine where you want to mount the unit. Verify that the surface is smooth, flat and dry.

Step 2

Drill two pilot holes into the surface 58 mm apart (about 2.28 in.).

Step 3

Insert a screw into each hole, leaving a gap of 5 mm (0.1968 in.) between the underside of each screw head

and the surface of the wall.

Step 4

Place the unit wall-mount slots over the screws and slide the unit down until the screws fit snugly into the

wall-mount slots.

Supported ATA Call Features

Depending on your system configuration, your ATA supports some or all the following call features:

• Transfer (attended or supervised)—In this type of transfer, you talk to the receiving party before you

complete the transfer.

Cisco ATA 191 User Guide for Cisco Unified Communications Manager

Supported ATA Call Features