Cisco CAB-SM-LCSC-5M Hinweise zur Installation
Blättern Sie online oder laden Sie pdf Hinweise zur Installation für Netzwerk-Hardware Cisco CAB-SM-LCSC-5M herunter. Cisco CAB-SM-LCSC-5M 42 Seiten. Passive optical system
Auch für Cisco CAB-SM-LCSC-5M: Hinweise zur Installation (36 seiten)
Seite drucken
Cisco Enhanced Wave Division Multiplexing
Optical System Installation Note
This document provides installation instructions for the Cisco Enhanced Wave Division Multiplexer
(EWDM) passive optical system. The EWDM system combines 1 GB Coarse Wave Division
Multiplexing (CWDM) connections using SFPs and GBICs with 10 GB Dense Wave Division
Multiplexing (DWDM) connections using XENPAK, X2, or XFP DWDM modules. These DWDM
connections can either be passive or boosted to allow a longer range for the connection. The EWDM
passive optical system product numbers are listed in
Table 1
EWDM Passive Optical System Product Numbers
Product Number
CWDM-CHASSIS-2=
EWDM-MUX8=
EWDM-OADM4=
EWDM-OADM2=
EWDM-OA=
CAB-SM-LCSC-1M=
CAB-SM-LCSC-5M=
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006–2009 Cisco Systems, Inc. All rights reserved.
Table
Description
two-slot chassis, 1 Rack Unit
8-channel MUX/DEMUX module
Four-channel Optical Add/Drop Multiplexer
(OADM) module
2-channel OADM module
DWDM booster amplifier
LC to SC connector cable, 1 m
LC to SC connector cable, 5 m
1.