Cisco Catalyst 3030 Handbuch "Erste Schritte - Seite 23
Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Netzwerk-Hardware Cisco Catalyst 3030 herunter. Cisco Catalyst 3030 34 Seiten. Cisco systems catalyst blade switch getting started guide
Seite drucken
Cisco Catalyst Blade Switch 3030 Getting Started Guide
Accessing Help Online
78-17052-01
To reset the switch:
At the switch prompt, enter enable and press Return or Enter.
•
At the Privileged EXEC prompt,
•
Return or Enter.
The switch displays the prompt to run the initial configuration dialog. See the
"Configuring the Switch Module" section on page 1-9
configuration information and set up your switch.
First look for a solution to your problem in the troubleshooting sections of the
hardware installation guide or the software configuration guide for your switch on
Cisco.com. You can also go to the Cisco Technical Support and Documentation
website for a list of known hardware problems and extensive troubleshooting
documentation, including:
Factory defaults and password recovery
•
Recovery from corrupted or missing software
•
Switch port problems
•
•
Network interface cards
Troubleshooting tools
•
Field notices and security advisories
•
Follow these steps:
Open your browser, and go to http://www.cisco.com/.
1.
Click Technical Support and Documentation.
2.
Click Product Support > Switches > LAN and ATM Switches > Cisco
3.
Gigabit Ethernet Switch Module > Troubleshooting.
Click the subject that addresses the problem that you are experiencing.
4.
, enter setup and press
switch#
Cisco Catalyst Blade Switch 3030 Getting Started Guide
In Case of Difficulty
to re-enter the
1-23