Cisco Catalyst 7500 Series Konfigurationshandbuch - Seite 27
Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Netzwerk-Hardware Cisco Catalyst 7500 Series herunter. Cisco Catalyst 7500 Series 50 Seiten. Chassis interface board
Auch für Cisco Catalyst 7500 Series: Datenblatt (11 seiten), Handbuch zur Fehlersuche (11 seiten), Ersetzen des Handbuchs (40 seiten)
Seite drucken
Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
Media (Voice/Video)
For 84-Series handsets Admission Control (ACM) must be enabled on both the Voice and Video
AC when the handset is configured for Admission Control Mandatory. PIVOT handsets support
Admission Control on PIVOT R1.5 and later.
To enable Admission Control (ACM):
1
In the navigation pane under 802.11 b/g/n, select Media, then select the Voice tab.
2
Select the Admission Control (ACM) checkbox. If CAC Method is available, select
Static from the drop down list. Set the Max RF Bandwidth to 50 for 84- and PIVOT
handsets to limit the bandwidth allocated to handsets to a value tested to provide good
performance. If available, ensure that the Reserved Roaming Bandwidth is set to 6%.
Admin Tip: Use the Static CAC Method.
It is very important to choose the Static CAC method to avoid limiting calls when
there is heavy background traffic.
Admin Tip: Disable WLAN before changing Admission Control settings.
Any WLAN using the network must be disabled before changing Admission Control
settings.
721-1001-000-AH.docx
December 2016
27