ACU-RITE 13239CC Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Wecker ACU-RITE 13239CC herunter. ACU-RITE 13239CC 4 Seiten. Proiection alarm clock

Seite drucken
About the Atomic Clock
In North America, the National Institute of Standards and Technologies operates
an atomic clock transmitter which transmits the time codes via radio
frequency.
This AcuRite clock features a receiver which receives the signal, allowing the
clock to maintain super-accurate time. NOTE: Due to solar radiation in the
atmosphere, the atomic clock signal is weaker during the
day.
Synchronization
with the atomic clock signal is likely to be more successful late at night when
there is less atmospheric
interference.
[
SETUP
)
AC Power Adaptor
Plug in the included AC Power adaptor to a standard power
outlet to provide constant power to the alarm clock.
Basic Setup
After powering on the alarm clock, it is recommended that the time and date be
manually set
initially.
After the initial manual time setting, the radio controlled
atomic clock will maintain it's accuracy and adjust for DST automatically.*
To manually set the current time, first make sure the clock
is
in CURRENT
TIME display mode (seconds will be ticking) by pressing the "MODE" button.
1.
PRESS AND HOLD
the
"SET"
button for 3 seconds. The HOUR will flash
.
2.
Press
"ADJUST"
to adjust the HOUR
.
Press
"SET"
to continue
.
3.
Press
"ADJUST"
to adjust the
MINUTES.
Press
"SET"
to
continue.
4.
Press
"ADJUST"
to adjust the
SECONDS.
Press
"SET"
to
continue.
5.
Press
"ADJUST"
for 12 or 24 hour display
.
Press
"SET"
to continue
.
6. Press
"ADJUST"
to adjust the DATE. Press
"SET"
to
continue.
7.
Press
"ADJUST"
to adjust the MONTH
.
Press
"SET"
to
continue.
8.
Press
"ADJUST"
to adjust the
YEAR.
Press
"SET"
to
continue.
9.
Press
"ADJUST"
to select your
LANGUAGE.
GB=English FR=French DE=German ES=Spanish IT=Italian
Press
'"
SET"
to continue.
ALL DONE?
Press
"MODE"'
button to confirm and
exit manual set
up.
Time Zone Selection
To select your time zone, first make sure the clock is in ALARM
ta!77--?
time mode (seconds display will change to
"AL"
). Then press the
~
"SET""
button to select the desired time zone
.
Select °For °C Indoor Temperature
Make sure you are in normal CLOCK display mode (seconds will be ticking]. then
press the
"SET"
button to toggle between °F and °C indoor temperature
display.
Display Backlight
You may activate the backlight for 4 seconds at any time by pressing the
"SNOOZE•LIGHr
button.
*the clock will maintain ifs accuracy and automatically switch for daylight saving
time, provided the clock signal is being successfully received
.
[
OPERATION
)
~
Set the Alarm Time
To SET the alarm time, first make sure the clock is in ALARM time mode by
pressing the "MODE" button (seconds display will change to "AL").
1.
PRESS AND HOLD
the "SET"" button for 3
seconds.
The HOUR will flash.
2.
Press the
"ADJUST""
button to adjust the alarm time hour. Press the "SET' button to
continue on to adjusting the alarm time
minutes.
3.
Press the
"ADJUST"
button to adjust the alarm time
minutes.
ALL DONE?
Press
"MODE"
button to confirm and
EXIT alarm time set
mode.
~
Turn the Alarm ON or OFF
To turn the alarm on or off, first make sure the clock is in ALARM time mode
by pressing the
"MODE"
button (seconds display will change to "AL:').
'4
TO TURN
ALARM ON:
Press the
"ADJUST'
button.
The BELL icon
appears.
WARNING:
THERE WILL BE NO SNOOZE FUNCTION AVAILABLE WHEN THE ALARM 15 SOUNDING.
4,
TO TURN
ALARM ON WITH
SNOOZE:
Press the "ADJUST"" button until
"Zz"
icon
Zi:
appears- the 4 minute snooze function will be available when the alarm
is
sounding
.
X'l
TO TURN
ALARM COMPLETELY
OFF:
Press the
"ADJUST"
button.
The BELL and
~
snooze ("Zz"]
icons
disappear.
[§
Alarm Clock Snooze Function
• If the alarm is ON
with SNOOZE
("Zz" icon]. pressing the
"SNOOZE•LIGHT"
button
will silence the alarm sound for 4
minutes.
The snooze function will work for a
maximum of 4
times.
• If the alarm is on
without SNOOZE
(NO "Zz" icon), pressing the
"SNOOZE•LIGHT"
button will silence the alarm until the next day when it will sound again at the same
ALARM
TIME.
The alarm WILL NOT sound again in 4
minutes.
~
Time
&
Temp Projector
BATTERY POWER:
Press the "SNOOZE•LIGHT" button to momentarily turn on the
projector for 4 seconds at a
time.
This is done to conserve battery power.
WHEN PLUGGED IN:
The projector is on
constantly.
FOCUS:
Aim the projector at the area you would like to display the time and indoor
temperature, then focus using the "FOCUS" dial on the back of the
clock.
FLIP THE PROJECTOR DISPLAY:
You may want to flip the projected TIME & TEMP info
vertically to allow it to read normally on the desired surface.
1. Press the "SNOOZE•LIGHT" button
2. Press the
..
ti:
"
(FLIP) button
-
[
BACKUP BATTERIES
)
Install 3
"AA'
Alkaline batteries to power the clock and alarm functions during a power
outage.
The Alarm Clock will function powered by batteries alone, but the projector and backlight can
only be activated momentarily [to conserve batteries] by pressing the "SNOOZE/LIGHT"
button.