ACU-RITE Intelli-Time 13027 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Wecker ACU-RITE Intelli-Time 13027 herunter. ACU-RITE Intelli-Time 13027 8 Seiten.

OPERATION

Using the Alarm Clock

Set the Alarm Time

To set alarm time, press and hold the "ALARM SET" button for 3 seconds to

enter ALARM SET MODE.

To adjust the currently selected (flashing) item, press and release the "+" or

"–" buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the "ALARM SET" button to adjust

the next preference. The preference set order is as follows:

ALARM CLOCK HOUR (Please note PM Indicator light)

ALARM CLOCK MINUTE

You will automatically exit ALARM SET MODE if no buttons are pressed

for 30 seconds. Enter ALARM SET MODE by pressing and holding the

"ALARM SET" button for 3 seconds.

Alarm Clock ON or OFF Function

To turn alarm on: Slide the "ALARM ON/OFF" switch to ON. The

ALARM ON indicator appears on the screen.

To turn alarm off: Slide the "ALARM ON/OFF" switch to OFF. The

ALARM ON indicator disappears from the screen.

Alarm Clock SNOOZE Function

The alarm will sound for 60 minutes before turning off when no button is

pressed. When the alarm is sounding, activate the 8 minute SNOOZE function

by pressing the SNOOZE button at the top of the alarm clock. SNOOZE

function can be activated up to 10 times before the alarm will no longer sound.

Clock is too dark,

hard to read or

doesn't work

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

• Reset the unit by pressing the RESET button located on

the bottom of the clock. This will reset the alarm to the

original factory settings. Time and date will need to be

entered after a reset.