Digitone DCB Plus Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Telefon-Zubehör Digitone DCB Plus herunter. Digitone DCB Plus 16 Seiten. Automatically blocks and routes screened calls with caller id
Seite druckenDial Displayed Number (Code 91)
The DIAL button can be used to dial the number displayed of someone who has called in using the Arrow
Up and Down buttons to select a specific caller. Simply press and hold the Dial button for 1 second to
start dialing that number. The default operation of the DCB Plus is to prompt you to either add or
remove the "1" (USA Country Code) before the DCB Plus dials the number. The prompt will ask "Dial 1?"
and to answer that prompt use the Up arrow key for YES and the Down arrow key for NO. After
selecting an answer the DCB Plus will dial the number afterwhich the display will prompt you to "Pick Up
Phone". To disable the Dial 1 prompt enter programming: press and hold the Program Button for 3
seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 90, display shows function. To return to the (default), enter programming: press and hold the
Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
for "Enter Code" displays enter 91, display shows function.
Display All Operating Codes (Code 92)
Press and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone",
when the prompt for "Enter Code" displays, enter 92 to see the current settings. The factory default list
is
16, 28, 30, 70, 73, 75,
77, 80, 85, 87, 91, 96.
English is the default operating language.
VoIP Option: Manually Set Clock and Date (Code 95)
Do not manually set the Time and Date if you already have full Caller ID Name and Number service.
The date and time are determined by your local phone service but if some phone services (like VoIP) do
not send the date and time with the name and number, you can manually set it. Press and hold the
Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
for "Enter Code" displays, enter 95 followed by the year in two digits, the month in two digits, the day in
two digits and the (Military) time in 4 digits. Example, 95 11 02 20 1425 * or 95 + Year 11 + Month 02
+ Day 20 + Mil Time 1425 (2:25PM) + * key to store. The display will show the Time and Date changed
immediately after you hang up and for each call thereafter.
Reset DCB Plus Call List Settings (Code 98#*)
To reset the DCB Plus lists to none (NIL), Press and hold the Program Button for 3 seconds until you
see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays, enter 98 #*.
NOTE: This command removes all stored numbers from all lists!
Reset DCB Plus User Settings (Code 99#*)
To reset the DCB Plus user settings to factory settings but not delete any call lists, Press and hold the
Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
for "Enter Code" displays, enter 99 # *.
Wildcarding (#)
When using the block or invite commands, you can use the # key to represent all numbers in a phone
number's column. In the phone number ex. 602 555 1212, if you want to block or invite all numbers (0-
9) in a single column you would insert the # key in that column. Examples: To block all numbers (0-9) in
the last column, you would use 40 602 555 121# *. To invite all numbers in the area code 602, use 50
602 ### #### *. To block all numbers in the exchange 555 (Ex. above) use 40 602 555 #### *.
DCB Plus Compatibility
Digitone's Call Blocker Plus works with all makes of analog telephony equipment and on all U.S. Domestic
and Foreign standard 2-wire telephone lines with FSK/DTMF (ETSI) Caller ID, DSL, FIOS, Cable Modems
and VoIP Digital services using (ATA) adapters from Skype™, Vonage™, Ooma™ or Magic Jack™*.
* All trademarks, trade names, service marks and logos of respective manufacturers referenced herein
are registered trademarks of their respective companies.
10