ACU-RITE SENC 150 Installationshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installationshandbuch für Medienkonverter ACU-RITE SENC 150 herunter. ACU-RITE SENC 150 8 Seiten. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Auch für ACU-RITE SENC 150: Referenzhandbuch (20 seiten), Installationshandbuch (4 seiten), Installationshandbuch (6 seiten), Anleitung Handbuch (12 seiten)

Seite drucken
SENC 150
Encoder orientation ...
Table
Underside
Saddle
of
Table
•
These instructions will guide you through installing
the encoder as shown in this view.
Saddle stop ...
•
Locate the stop approximately 1/2" down from the top
edge of the saddle, in line with the column way.
•
Drill and tap location for 5/16-18 x 1/2" deep.
Cable exit ...
Plug
Cover plate
T-10 Torx screw (2)
•
Determine the cable exit direction before installing
the encoder.
•
To change the cable exit direction; remove the cover
plate and rotate the cable 180°.
P.N. 385072-208 Ed B 2/06
Back Side of Table
Center support
Encoder Assembly
Reading head
Reading head
bracket
Saddle stop
Stop
5/16-18 x 3/4" SHCS
Vinyl cable grommet
Armor cable hex crimp
Installation Manual 385072-38
2
Encoder Installation Manual For: Vertical Knee Mill
Longitudinal X Axis on Rear of Table
Encoder Installation ...
Reading head bracket
Note
orientation
•
Temporarily attach the bracket to the reading head.
Table
Underside of table
Saddle
•
With the table at its center of travel, set the encoder
against the table and the reading head bracket
against the saddle.
Note: Raise the assembly above the way cover plate
if the bracket interferes with it. The step in the
bracket can not be above the underside of the table
Mark end mounting hole
•
Center the encoder on the back side of the table.
Position the underside of the end caps flush with the
underside of the table (see note above) or parallel with
the table top.
•
Mark one end mounting hole location to the back side
of the table and remove the assembly.
•
Drill and tap hole location for a 1/4-20 x 1/2" deep.
8-32 x 5/8" SHCS (2)
Encoder
Reading head bracket
Underside of
table
Acu-Rite Companies Inc.