Cisco Firepower 2110 Software-Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Software-Handbuch für Netzwerk-Hardware Cisco Firepower 2110 herunter. Cisco Firepower 2110 37 Seiten. Rack-mount and ground the chassis
Auch für Cisco Firepower 2110: Handbuch (12 seiten), Handbuch für den Einsatz (8 seiten), Erste Schritte (42 seiten)

Cisco Firepower 2110 Software-Handbuch
Cisco ASA and Firepower Threat Defense Reimage Guide
The installation process erases the flash drive and downloads the system image. You are prompted to continue
with the installation. Enter y.
Erasing disk0 ...
Verifying
Downloading
Extracting
Package Detail
Description: Cisco ASA-NGFW 6.3.0 System Install
Requires reboot: Yes
Do you want to continue with upgrade? [y]: y
When the installation finishes, press Enter to reboot the device.
Warning: Please do not interrupt the process or turn off the system.
Doing so might leave system in unusable state.
Starting upgrade process ...
Populating new system image
Reboot is required to complete the upgrade. Press 'Enter' to reboot the system.
The reboot takes upwards of 30 minutes, and could take much longer. Upon reboot, you will be in the Firepower
Threat Defense CLI.
Step 8
To troubleshoot network connectivity, see the following examples.
Example:
View the network interface configuration:
firepower-boot>show interface
eth0 Link encap:Ethernet HWaddr 00:a0:c9:00:00:00
inet addr:10.123.123.123 Bcast:10.123.123.255 Mask:255.255.255.0
inet6 addr: fe80::2a0:c9ff:fe00:0/64 Scope:Link
inet6 addr: 2001:420:270d:1310:2a0:c9ff:fe00:0/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:522369 errors:0 dropped:0 overruns:0 frame:0
TX packets:2473 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:42120849 (40.1 MiB) TX bytes:170295 (166.3 KiB)
...
Ping a server:
firepower-boot>ping www.example.com
PING www.example.com (10.125.29.106) 56(84) bytes of data.
64 bytes from qg-in-f106.1e100.net (74.125.29.106): icmp_seq=1 ttl=42 time=28.8 ms
64 bytes from qg-in-f106.1e100.net (74.125.29.106): icmp_seq=2 ttl=42 time=28.1 ms
64 bytes from qg-in-f106.1e100.net (74.125.29.106): icmp_seq=3 ttl=42 time=28.1 ms
64 bytes from qg-in-f106.1e100.net (74.125.29.106): icmp_seq=4 ttl=42 time=29.0 ms
^C
--- www.example.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 28.159/28.549/29.022/0.437 ms
firepower-boot>
Reimage from ASA to Firepower Threat Defense
Cisco ASA and Firepower Threat Defense Reimage Guide
11