Digitrax DH163A0 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Medienkonverter Digitrax DH163A0 herunter. Digitrax DH163A0 8 Seiten. Mobile decoder circuit board replacement 1.5 amp/2 amp peak 6 fx3 functions, 0.5 amp

Seite drucken

Digitrax LocoMotion™ System

Your locomotives look like the real thing, now you can make them run like the

real thing, too. Digitrax decoders incorporate torque compensation for smooth

as silk operation. You can also program CVs that control momentum, 3 step

and 128 step speed tables, switching speed, normal direction of travel,

scaleable speed stabilization and more to take full advantage of the Digitrax

LocoMotion™ System.

Momentum-C C V03 & CV04

Acceleration is controlled by CV03 and deceleration by CV04. Both come

from the factory set to 000/x00. A range of 000/x00/ to 031/x1F is available for

both accel and decel. We recommend that you try CV03:003/x03 and

CV04:000/x00 as a starting point for experimenting with momentum.

Speed Tables-H H ow the Loco Responds to the Throttle

There are two types of speed tables: 3 Step Tables and High Resolution 28 Step

Tables. Please see your Decoder Manual for a discussion of the 28 Step Tables.

The 3 Step Tables are set up by programming 3 CVs: Start Voltage (CV02),

Mid point Voltage (CV06) and Max Voltage (CV05). These values are set at

000/x00 at the factory. All have a range of values from 000/x00 to 255/xFF. We

recommend the following CV values as a starting point for experimenting with

speed tables.

Loco Type

Switcher

Concentrated low speed. Limited top

speed

Road Switcher

Prototypical top speed w/evenly

distributed curve from 0 to top speed

Mainline Loco

Quick increase to cruising speed then

levels off to prototypical top speed.

D D

C C

igitrax

ommand

Run Your Trains, Not Your Track!

www.digitrax.com

C C

ontrol

V Start

V Mid

CV02

CV06

002/x02

038/x26

002/x02

048/x30

002/x02

128/x80

V Max

CV05

064/x50

098/x62

154/x9A