Digitrax SoundFX SDXH186MT Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Controller Digitrax SoundFX SDXH186MT herunter. Digitrax SoundFX SDXH186MT 16 Seiten. Complete train control

Seite drucken

2. Choose AD2 for 2 digit addressing or AD4 for 4 digit addressing.

3. Choose the address you want to set up for the decoder.

4. Complete address programming by pressing ENTER.

Note: CV29 must also be programmed to enable 4 digit addressing, this

is done automatically by the DT4XX throttles. See your Digitrax Decoder

Manual or the Digitrax Toolbox App for how to set up CV29.

Using this decoder in other locomotives

The factory supplied sound project loaded into the SDXH186MT is for a

GP38 diesel locomotive, other preloaded projects are selectable with the

value in CV60. If you want to install it in a different locomotive, you can

simply load a different sound project for that type of locomotive. The cam

input is available on pin 1 for Steam installations where supported by the

locomotive.

Digitrax LocoMotion

System

Your locomotives look like the real thing, now you can make them run

like the real thing, too. Digitrax decoders incorporate torque compensa-

tion for smooth as silk operation. You can also program CVs that control

momentum, 3 step and 128 step speed tables, switching speed, normal

direction of travel, scalable speed stabilization and more to take full ad-

vantage of the Digitrax LocoMotion System

Momentum-CV03 & CV04

Momentum is part of the LocoMotion System. Acceleration is controlled

by CV03 and deceleration by CV04. Both come from the factory set to

000. A range of 000 to 031 is available for both accel and decel. Try

CV03:003 and CV04:000 as a starting point for experimenting with

momentum.

— 5 —