Cisco PIX-515E Schnellstart-Handbuch - Seite 33

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware Cisco PIX-515E herunter. Cisco PIX-515E 42 Seiten. Security appliance
Auch für Cisco PIX-515E: Schnellstart-Handbuch (42 seiten)

Seite drucken

Ethernet 5

Ethernet 3

Ethernet 2

Ethernet 4

Ethernet 2

Ethernet 3

• If your PIX 515E has one or two single-port Ethernet circuit boards installed in the

auxiliary assembly on the left of the unit at the rear, the circuit boards are numbered top

to bottom so that the top circuit board is Ethernet 2 and the bottom circuit board is

Ethernet 3. (Using more than one Ethernet circuit board requires the

PIX 515E-unrestricted license for access. If a four-port FE card is used with the restricted

license, only one network interface is activated.)

If you need to install an optional circuit board, refer to the

Note

PIX

515E" section in the Cisco PIX Firewall Hardware Installation Guide.

If you have a second PIX 515E to use as a failover unit, install the failover feature and cable

as described in the

Installation Guide.

100 Mbps

Link

FDX

100 Mbps

FAILOVER

Link

FDX

10/100 ETHERN ET 0/0

CONSO LE

Ethernet 1

Ethernet 0

100 Mbps

Link

FDX

100 Mbps

FAILOVER

Link

FDX

10/100 ETHERN ET 0/0

CONSO LE

Ethernet 1

Ethernet 0

"Installing

Failover" section in the Cisco PIX Firewall Hardware

"Installing a Circuit Board in the