AcueLighting Profile S300 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DJ-Ausrüstung AcueLighting Profile S300 herunter. AcueLighting Profile S300 9 Seiten. 300w led framing profile spotlight

Seite drucken

Operation

The LED Profile 300WW can operate in three different modes. In each mode you can run the fixture as a stand-
alone fixture or in a master/slave configuration. This next section will detail the differences in the operating modes.
Control Menu Map
Default setting in bold.
MAIN MENU
DMX
001-512
DMX
Auto
Mode
Manual
Curve
Dimmer
Mode
Authorization
Signal Priority
Advance
Signal Hold
RDM
Screen Timeout
Screen Brightness
Dimming Freq
Reset
Yes/No
Reverse
Yes/No
Addressing
All fixtures should be given a DMX address when using DMX signal, so that the correct fixture responds to the
correct control signal. This digital starting address is the channel number from which t he fixture starts to listen to
the digital control information sent out from the DMX controller. The allocation of this starting address is achieved
by setting the correct number on the display located on the base of the device.
LEVEL 1
LEVEL 2
1/2/3CH
Program
Speed
Brightness
Strobe
0.3-3.0
Standard
Stage
TV
Architecture
Theatre
Studio
Custom
On/Off
DMX
On/Off
On/Off
30S
Never
25-100%
1.20 - 24.0 KHz
LEVEL 3
DMX address setting
DMX channel mode
001-008
Preset programs
001-009
Programs speed
000-255
Dimmer 0-100%
000-255
Strobe with speed increasing
Dimmer curves adjustment
Dimmer mode, Standard
Dimmer mode, Stage
Dimmer mode, TV
Dimmer mode, Architecture
Dimmer mode, Theatre
Studio power mode, silent
Fade in
(150 ms~2230 ms)
Custom dimmer curve
Fade out
(150 ms~2230 ms)
Advanced
qualified technicians should perform
this function. Contact your local dealer
for
DMX signal priority setting
Run if signal cut
RDM function on/off
Display shut off time
Display brightness
Dimmer frequency setting
System reset
Display reverse 180 degree
6
FUNCTION INSTRUCTION
settings/calibration(Only
password.)
V1.0