AcueLighting Extreme 150 Hybrid Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Beleuchtungsanlagen AcueLighting Extreme 150 Hybrid herunter. AcueLighting Extreme 150 Hybrid 11 Seiten.

Seite drucken
2. LED Diodes
During operation, the lamps will reach temperatures of up to 75° C. Touching the lamps may cause serious
burns! Objects coming into contact with the lamps during and shortly after operation may catch fire!
3.
Supply Voltages, Mains Cord and Connection to Mains
l
The handling of supply voltage, mains cords and connections to mains calls for particular care considering
the risk from a life-threatening electric shock, the risk of fire and the risk of short circuits! Please observe the
following notes in particular:
l
Products operating on supply voltage should be kept out of the reach of children. Therefore ensure the
permanent supervision if children are in the immediate vicinity of the product!
l
For commercial facilities the regulations on the prevention of accidents of the respective trade association
must be observed. The operation of this equipment at schools, training facilities, and hobby or self-help
workshops must be supervised responsibly by trained personnel
l
Check the product regularly for any damage to the mains cord! Should you discover any damage to the
mains cord, do not operate or disconnect this product! Secure the product against accidental operation and
contact your specialized dealer Always separate the product from mains by holding the mains plug by the
handling surface. Never disconnect by holding the line cord! Be sure to connect the product exclusively to
230 V, 50 Hz A/C!
l
Always ensure during installation, operation, transportation, and when storing the product that the mains
cord is not exposed to possible mechanical damage, or damage caused by humidity, fluids, heat or cold!
l
The product's power input connector must not be exposed to stress from pull. Connect the mains connection
once the product has been installed only. Always connect the mains plug last.
l
The product must only be connected to a proper power outlet. Connect the mains cord to suitable outlets
only. Use extensions cords in compliance with specifications only. Do not allow the mains cord to come into
contact with any liquids.
l
Ensure during installation, operation, transport and storage that none of the cables are freely exposed or
damaged.
l
Never touch the mains cord, mains plug and outlets with wet or damp hands.
l
When not using the product, and prior to cleaning always disconnect the product from mains. To do so, hold
the mains plug by the handling surface and never pull from the mains cord itself.
l
Never connect the device to dimmer packs.

4. Housing

l
Always ensure during installation, operation, transport and when storing the product that no force or other
impact has damaged the housing!
l
The housing must not touch onto any other devices or objects during operation!
l
Easily flammable materials, e.g. decoration material and other surfaces and objects, must maintain a
minimum distance of 3m to the housing! Walls must be a minimum distance of 50cm to the housing! The
device must only be installed on a fireproof surfaces (no carpet)! Always ensure a proper circulation of air.
l
Do not touch the housing during operation. The housing is safe to touch approx. 5 minutes following the end
of operation as it will heat up during operation.
The device must never be carried via the projector arms. Use the carrying handles only!
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE!
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT CIRCUIT!
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT CIRCUIT!
3