Cisco TelePresence MCU 4500 Series Handbuch "Erste Schritte - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Netzwerk-Hardware Cisco TelePresence MCU 4500 Series herunter. Cisco TelePresence MCU 4500 Series 15 Seiten. Multipoint control units
Auch für Cisco TelePresence MCU 4500 Series: Erste Schritte (18 seiten)
Seite drucken
Selecting participants using ConferenceMe
When using ConferenceMe you can scroll through participants in the same way as
you would using a hardware endpoint.
Use the Left/Right keys on your keyboard to scroll through participants.
Alternatively, you can select Next participant from the right-click menu.
Selecting participants using Movi
When using Movi you can use the DTMF keypad to scroll through participants.
Use the 4/6 keys on the keypad to scroll through participants.
Controlling another participant's camera
During a conference, you might need to change the camera settings for one of the
conference participants. To do this, use FECC or DTMF tones.
1
Enable FECC or DTMF tones, depending on your video endpoint.
2
Select the participant whose camera you want to control. Refer to Selecting
participants earlier in this document.
3
Press zoom in (or 1 if using DTMF tones) to enter the mode which passes the
navigation and zoom controls through to the participant's camera.
4
Use FECC or DTMF tones to control the participant's camera.
5
To stop controlling the participant's camera, wait five seconds.
The table below describes the icons that appear on-screen.
Icon
Meaning
You are now controlling the far-end video camera
You are moving the far-end video camera to the left or right.
(If you are using the numeric keypad to navigate, use 4 for left
and 6 for right)
You are moving the far-end video camera up and down.
(If you are using the numeric keypad to navigate, use 2 for up
and 8 for down)
Using in-conference features
11