Cisco UCS B200 M3 Installations- und Wartungshinweise

Blättern Sie online oder laden Sie pdf Installations- und Wartungshinweise für Netzwerk-Hardware Cisco UCS B200 M3 herunter. Cisco UCS B200 M3 36 Seiten. Blade server
Auch für Cisco UCS B200 M3: Installationshandbuch (34 seiten), Installations- und Wartungshinweise (37 seiten), Handbuch (8 seiten), Upgrade-Handbuch (21 seiten), Installations- und Wartungshinweise (28 seiten)

Seite drucken
Cisco UCS B200 M3 Installations- und Wartungshinweise
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Cisco UCS B200 M3 Blade Server Installation and
Service Note
The Cisco UCS B200 M3 (shown in
two CPU sockets using Intel E5-2600 series CPUs and up to 24 DIMMs; it supports one modular LOM
(dedicated slot for Cisco's Virtual Interface Card) and one mezzanine adapter. At this time, the UCS
B200 M2 (second generation) server is still available and is documented elsewhere. You can install up
to eight UCS B200 Blade Servers to a UCS chassis, mixing with other models or Cisco UCS blade
servers in the chassis if desired. The Cisco UCS B200 M3 is managed by Cisco UCS Manager version
2.0(2m) and later.
Figure 1
1
Asset tag
2
Blade ejector handle
3
Ejector captive screw
4
Hard drive bay 1
5
Hard drive bay 2
6
Power button and LED
1.Each server has a blank plastic tag that pulls out of the front panel which is provided so that you can add your own
asset tracking label without interfering with the intended air flow.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Figure
Cisco UCS B200 M3 Front Panel
4
1
2
1
1) is the latest Cisco Intel-based, half-width blade supporting
UCS B200 M3
7
6
8
3
7
Network link status LED
8
Blade health LED
9
Console connector
10 Reset button access
11 Beaconing LED and button
5
11
9
10