Cisco UCS X10c Installations- und Wartungshandbuch - Seite 24
Blättern Sie online oder laden Sie pdf Installations- und Wartungshandbuch für Netzwerk-Hardware Cisco UCS X10c herunter. Cisco UCS X10c 38 Seiten. Front mezzanine gpu module
Seite drucken
Installing a GPU Cage
What to do next
Choose the appropriate option.
•
•
•
Installing a GPU Cage
Use the following task to reinsert a GPU cage into the front mezzanine GPU module.
Step 1
Rotate the GPU cage down until it lies flat on the sheet metal as far away from the GPU module's front panel as possible.
Step 2
Carefully slide the GPU cage toward the front of the front mezzanine GPU module until the rear captive screws line up
with their screw holes.
When properly installed, the front of the GPU cage is captured by "T" nuts.
Step 3
Lift up on the GPU cage to verify that it is captured by the "T" nuts.
If you cannot lift the GPU cage, it is correctly installed.
Step 4
Using a #2 Phillips screwdriver, tighten each of the captive screws to 5 in-lb of torque.
Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide
16
Removing a GPU Card, on page
Installing a GPU Card, on page
Installing a GPU Cage, on page
17.
18.
16.
Servicing the GPU Module