Epson 2580 - Perfection PHOTO Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scanner Epson 2580 - Perfection PHOTO herunter. Epson 2580 - Perfection PHOTO 6 Seiten. Scanning application force quits on mac os 10.4
Auch für Epson 2580 - Perfection PHOTO: Produkt-Support-Bulletin (1 seiten), Freigabemitteilung (1 seiten), Schnellstart-Handbuch (8 seiten), Produkt-Support-Bulletin (23 seiten), Handbuch (11 seiten), Update (1 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (24 seiten), Produkt-Support-Bulletin (29 seiten), Produkt-Support-Bulletin (8 seiten), Produkt-Support-Bulletin (3 seiten), Produkt-Support-Bulletin (14 seiten), Produkt-Support-Bulletin (12 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (11 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (22 seiten), Produkt-Support-Bulletin (12 seiten), Produkt-Support-Bulletin (21 seiten)

Epson Perfection 2580 Photo

3. Flip out the metal film guide and press it down until it

clicks into place.

Caution: Before loading a film strip, make sure it contains at

least 2 photos, but no more than 6. Don't load folded, creased,

curled, or sticky film into the auto film loader or it may damage

the film or your scanner.

4. Place the film strip in the film loader with the shiny base

side facing down. Your images and any wording on the film

strip should appear backward on the side that faces up.

5. Slowly slide the film into the loader. Let go of the film when

the scanner begins to automatically feed it into position.

6. To scan each frame in your film strip as a separate image,

press the 4 Scan and Save button or open EPSON Smart

Panel and select

Scan and Save

using ideal settings in Full Auto Mode and opens each one

separately in ArcSoft PhotoImpression for viewing, editing,

and printing. See your on-screen Reference Guide and Smart

Panel help for instructions on selecting scan modes and

complete scanning details.

4 - Epson Perfection 2580 Photo

. This scans each frame

7. When you finish scanning the film strip, press the

button inside the auto film loader to eject the film. Wait for

the ] Start light to stay on green, then remove the film

strip.

Caution: Don't turn off the scanner with a film strip loaded in the

auto film loader. Never pull film out of the loader by force.

8. Flip the film guide back inside the auto film loader and

press it down until it clicks into place.

9. Close the auto film loader cover.

10. Replace the document mat before you resume scanning

reflective (paper) documents.

Scanning a Slide

1. Make sure you removed the reflective document mat, as

described in the previous column.

2. Place the slide holder on the top of the scanner glass so that

the tab labelled "D" fits into the area labelled "D" on the

document table.

6/04

Eject