Cisco 2500 Series Konfigurationshandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Server Cisco 2500 Series herunter. Cisco 2500 Series 50 Seiten. Wireless controller
Auch für Cisco 2500 Series: Handbuch zur Installation (12 seiten), Konfigurationshandbuch (19 seiten), Handbuch für den Einsatz (23 seiten), Handbuch "Erste Schritte (47 seiten)

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

to hand out leases to the connected clients. (Note: The WLC's DHCP server does not lease

addresses to the AP.) The instructions for doing so are included at the end of this document.

From the main menu, click Controller.

In the navigation pane, click Interfaces. Verify that the proper IP addresses are

assigned to the interfaces.

Under Interface Name click management. Note: the screenshot is from a Cisco 5500.

7.4 and later versions provide redundancy management and redundancy port entries.

7.6 and later versions support a virtual interface entry. If the interface is not present on

the model being configured, no values need to be entered.

Under DHCP Information, enter the IP address of the Primary DHCP Server.

Repeat this step for the ap-manager interface, if present on the model configured.

Click the Apply button and save the changes.

721-1001-000-AH.docx

December 2016